Archived posting to the Leica Users Group, 1999/09/06

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] R8 winder woes.
From: Jeffcoat Photography <jeffcoatphoto@sumter.net>
Date: Mon, 06 Sep 1999 16:56:01 -0400

David: I've had similar problems with the winder for the R-7. Who knows, I'm waiting
for the motor of the R-8 before I get into the water with this body. You really need
to establish a relationship with the Folks in NJ, they can move faster than 6-wks.
cheers Wilber

David Strang wrote:

> I shot a football game yesterday with my R8 (winder and auxiliary battery pack).
> The winder has a almost fresh set of batteries and the auxiliary battery had
> just been recharged last week. After my third roll of film, the R8 started to
> act strange. First, the winder would seem to stop prematurely. Touching the
> release part way again would see the winder advance an extra frame and then arm
> the shutter. Finally, I just tried using the manual crank from the stand off
> position and the display would light up, but the shutter would not fire.
>
> The only thing I could think of was that conditions: temperature 90F+, 95%
> humidity, hot sun on black camera. Maybe the electronics were over heated, or
> maybe the batteries were over heated.
>
> Looking at the film, that third roll had spots where 1, 2, 3, or 4 frames were
> skipped over erratically.
>
> Has any one seen, experienced or heard of this happening with the R8 and winder?
>
> I replaced the winder batteries with a fresh set, and after firing a few shots,
> the winder seemed to sound almost normal again. My opinion is the R8 and winder
> is VERY sensitive to fluctuations in battery voltage. A couple of weeks prior to
> this the same problem occurred on similar conditions.
>
> Any suggestions?
>
> BTW, I just picked up a DEMO 180f2, but the diaphragm was slow to close. Either
> dried lube or a weak spring. I sent it into Leica NJ where they specked it as a
> 3 hour bench job (covered by warranty) and turn around would be SIX weeks,
> though they would expedite to THREE weeks.
>
> The thought of being without my R8 and winder for 6 weeks makes me hesitant to
> send it in to Leica.
>
> Regards,
>
> Dave Strang
> dstrang@up.net
>
> ----Pentium Pro/Windows NT 4-SP3/Zip100/Zip250/Jaz2GB/Astra 600S scanner/RedHat
> Linux 5.0/MSVC++ 5.0/MSVC++ 6.0/PowerStation Fortran 4.0/Photoshop
> 4.01/Photoshop 5.0/Illustrator 7.01/KPT 3.0/KPT 5.0/PhotoTools 3.0/Portfolio
> 4.0/Total XAOS/Matlab 5.0/Maple V/Office 97 Pro+SR2/MacOpener 4.0/AMIGA
> 1000/AMIGA 2000-GVP030 Combo/AMIGA 3000(2)/Indigo 2 XZ/IRIX 5.3/IRIX 6.2/ and
> member of UP.NET!