Archived posting to the Leica Users Group, 2000/05/14
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]> You can play with this wheel trying to adjust its position > back and forth with a knife or whatever you can use I suggest you buy a $1.99 slotted "precision screwdriver" at Sears (40 x 2.5 mm, total length about 4 or 5 inches, small red cap on the end). Use a couple pliers to bend the shaft roughly 90 degrees, about an inch from the slotted tip. With a knife or a straight shaft you're not likely to be able to apply enough force in the right places because getting in there just isn't easy. While you're at it, buy a $3 "FERNCO" Qwik-Cap model QC-101, 1 and 1/2 inch diameter, at Home Depot's plumbing section for your 50/2 Summicron-M and you're good to go. Spend all the money you saved on some rolls of film and go shoot! - --Andrew