Archived posting to the Leica Users Group, 2000/06/17
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]I have the previous version of the HP scanner, and I have been able to make great prints (one of them is 10" x 15") and there is no sign of digital artifacting present. I have also printed a test print at the full 13" x 19" enlargment factor (but cropped down to print on standard 8 1/2 x 11 paper), and it too looks fine. I could have improved it slightly by using photoshop to resample the print up to something greater than 200 dpi, but the improvement would have been minor, IMHO. Dan C. At 10:13 AM 17-06-00 -0400, Julian Koplen wrote: >There has been considerable discussion here about the merits of the Epson >870/1270 family of printers. I have been given "clearance" to purchase one >of these as a gift and need to place my order within a day or so, but I >don't know if I can take advantage of the 1270's large print capability. > > My scanner, a HP S20, will deliver 2400 dpi with 35mm film (from Leica M >and R). My question is >whether this scanning resolution is sufficient to produce a quality 11 x 14 >image. My >calculation is that the final print will have about 218 dpi. Anybody have >any experience with "stretching" the digital image that much? > >Thanks............Julian > > > >