Archived posting to the Leica Users Group, 2000/08/03
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]She did NOT understand what I was saying. Bill Satterfield wrote: > I sent my M3 off for a CLA and found a problem they should have corrected at the > time of the CLA. I e mailed Brenda, explained the problem , in detail using the > nomenclature in the IB. She waited a l o n g time to respond, said she did > understand what I was talking about. I e mailed her again, many months ago and I > have never heard from her. I just forgot about it and began to use the camera. It > was minor anyway but........ > > CapsTeeth@aol.com wrote: > > > In a message dated 8/3/00 2:15:42 PM Eastern Daylight Time, V8PWR@aol.com > > writes: > > > > << Hello . does anyone know if it's possible to replace an eyelet from an M6 > > easily from the outside . > > I had the shutter side eyelet worn on my M6 , but , amazingly , Leica France > > did replace the other side one during recent CLA . > > Thanks . > > Jo GOODTIMES >> > > > > If you take the bottom plate off your M6 and look along the inside walls of > > the film chamber on both sides you'll see the 2 cross head screws that secure > > each strap eyelet from the inside. If you had a tiny 90-degree ratcheted > > driver with a cross head bit you could replace the viewfinder/rewind-end > > eyelet easily since the film chamber is empty. On the shutter/wind end, the > > takeup spool assembly would have to be removed first. I'm not sure if the > > factory techs ever do it that way, or if they have whole camera apart. I had > > them replaced on my M2 along with a CLA. If your M6 had both worn-out > > eyelets at the recent CLA and Leica only replaced one of them, I'd send it > > back and ask them to do now what they should have done then. Unless they've > > got the gall to accuse you of wearing out one eyelet since the CLA, they > > should do the right thing and do it as a courtesy. Then again, they're Leica > > ; )