Archived posting to the Leica Users Group, 2002/08/05
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Hi Darrell, > I wasn't really clear enough on this. > > The issue with Epson's older printers (like my 3000) > is that the print is not perfectly rectangular. For > example on a large print it is not unusual to have an > 8th of an inch difference in length on one side of the > paper vs. the other on a 20 inch print. Even at half > that, a 16th of an inch is a lot to be off if you are > trying to match up with a digital negative produced on > yet another printer. You can't properly align the two > images if one or the other is slightly long or short. I haven't had that problem with the paper I'm using...and I routinely print 13x19 prints... The paper would have to have skewed in order for what you say to happen, and that skew would be quite noticeable... Are you sure you are seeing prints with the two long sides different lengths??? The prints would also look a bit odd in a matte that is just slightly larger than the print...and I haven't noticed that either... Regards, Austin - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html