Archived posting to the Leica Users Group, 2002/08/13
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]At 01:28 PM 8/13/02 -0400, Robert Marvin wrote: >After your film is developed, you must remove the torn off tab from >the spool slit opposite the one into which you threaded the film. >Otherwise a film chip is likely to get stuck in the spool, preventing >you from using it again. --I've never been able to fix a spool after >this happens--any tips? > The Leica Cassettes have a fascia plate held in by two small screws. Remove these, and the plate will allow all of the minor springs, fillers, fitters, and bits-'n'-pieces to fly all over the place. If you can find everything, you can then reconstruct it minus the film chip. If you've lost a bunch of parts, well, you were going to throw it away anyway ... Marc msmall@infi.net FAX: +276/343-7315 Cha robh bąs fir gun ghrąs fir! - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html