Archived posting to the Leica Users Group, 2003/01/21

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] M motor drive/winder/RabidWinder
From: "\(SonC\) Sonny Carter" <sonc@sonc.com>
Date: Tue, 21 Jan 2003 18:20:54 -0600
References: <NABBLIJOIFAICKBIEPJJOECFDMAB.darkroom@ix.netcom.com>

Austin, it does take some getting used to.  But geez If you are a left eye
shooter, it will change your life.  I was not keen on the round handle, now
it feels natural.  The M6 without the motor feels too skinny to grasp.

I shoot with an M6, and the bump of the button almost feels like a notice,
"I'm ready!"

I have not noticed any problems with slow speeds, and I've been shooting a
good deal of them with the pyrotechnic season in Natchitoches, Christmas
fest, we had fireworks every weekend for a month, so I was shooting a lot at
1/15th, and slower. I never turned the motor off, and there is no problem on
the negatives that I can see..

http://www.sonc.com/paw3/sparklers.htm

It will take some time, but you *may* start cheering for this device.  I've
been thinking of another M, but it would have to have the motor.

Sonny
http://www.sonc.com




- ----- Original Message -----
From: "Austin Franklin" <darkroom@ix.netcom.com>
To: <leica-users@mejac.palo-alto.ca.us>
Sent: Tuesday, January 21, 2003 6:03 PM
Subject: RE: [Leica] M motor drive/winder/RabidWinder


> Hi Jerry,
>
> I believe the M motor's operation has to do with the way it tells that the
> shot has been fired.  I THINK it keeps a little tension on the drive
> mechanism, and when the shutter releases, the tension is then "decreased"
> (probably entirely removed, save friction), and the motor senses that and
> winds a prescribed "distance", which seems to be precisely 360...  I
wonder
> if it has enough of a delay for the slow shutter speeds.  I'll see what
the
> manual for it says.
>
> Regards,
>
> Austin
>
> > -----Original Message-----
> > From: owner-leica-users@mejac.palo-alto.ca.us
> > [mailto:owner-leica-users@mejac.palo-alto.ca.us]On Behalf Of Jerry
> > Lehrer
> > Sent: Tuesday, January 21, 2003 6:54 PM
> > To: leica-users@mejac.palo-alto.ca.us
> > Subject: Re: [Leica] M motor drive/winder/RabidWinder
> >
> >
> > Austin
> >
> > Yes, too bad it isn't like the Nikon motor drive which has a "S" or "C"
> > selector button for single or continuous exposures. But my Nikon
> > motor is a 25 year old design at least.  The Nikon only winds when
> > RELEASING the button when set for single exposures.
> >
> > I was once told of the difference 'tween a motor drive and a motor
> > winder, but Leica seems to have blurred the difference.
> >
> > Jerry
> >
> >
> > Austin Franklin wrote:
> >
> > > I received my M Motor today (and the SF-20 ;-)...it works,
> > probably as it
> > > should...but BLECK!  It forces the shutter button back up and keeps on
> > > firing if you keep pressure on it.  Now I know what people were
talking
> > > about.  If you are considering one of these, I suggest you
> > check this out by
> > > holding pressure on the shutter button while manually winding the
> > > camera...it'll push the button back up during the winding.
> > >
> > > One of the things I do when taking a picture is slowly push the
shutter
> > > button down and then hold it down after taking the picture all
> > in one smooth
> > > action, decreasing camera jitter for low light situations.  If
> > I want to use
> > > this "thing", it's going to take some technique adjustment!
> > >
> > > Austin
> > >
> > > --
> > > To unsubscribe, see
http://mejac.palo-alto.ca.us/leica-users/unsub.html
> >
> > --
> > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html
>
> --
> To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html

- --
To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html

In reply to: Message from "Austin Franklin" <darkroom@ix.netcom.com> (RE: [Leica] M motor drive/winder/RabidWinder)