Archived posting to the Leica Users Group, 2004/02/09
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Adam, I experienced something similar with my Nikon LS-2000 and the film strip feeder--it was very quirky in the way you describe, often rejecting what looked like a perfectly good stip 2-3 times before finally accepting it. I eventually dumped the film strip feeder and now use only the slide feeder with the metal film adapter. It is OK for my workflow, because I always look at the negatives on a light table and select the ones to scan, so I have no need for scanning entire strips. Nathan > > van: Adam Bridge <abridge@mac.com> > datum: 2004/02/09 ma PM 06:11:11 CET > aan: leica-users@mejac.palo-alto.ca.us > onderwerp: [Leica] OT: 4000ED misbehaving > > If anyone used a Nikon 4000ED I'd sure appreciate some thoughts since it's the > back-end of my Digital-Leica ensemble and is misbehaving. > > First Indication of Trouble: film strips inserted are rejected immediately and a > flashing green status light is displayed when a scan is requested. > > Using the single-slide adapter and the metal film strip adapter I can scan a > single frame. > > Software is up to date and VueScan gives the same behavior. So I'm thinking it's > a scanner problem. > > Any suggestions would be appreciated. > > No error messages reported although VueScan does give an error about auto focus. > > I'd GREATLY appreciate any suggestions. I've tried the Nikon web site but it > wasn't much of a help. > > AB > -- > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html > - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html