Archived posting to the Leica Users Group, 2004/10/10
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Hello, Make sure the scanner green light is solid and has finished the self checking start up. Then start your scanning software. I called Nikon about this problem and they said sometimes if the scanner has not done a complete self diagnostic at the start for some reason the software will send out erratic error messages. HTH Brian > From: "Jorg Willems" <jorg.willems@pp.inet.fi> > Reply-To: Leica Users Group <lug@leica-users.org> > Date: Sun, 10 Oct 2004 11:41:24 +0300 > To: "'Leica Users Group'" <lug@leica-users.org> > Subject: [Leica] OT: Nikon LS-2000 help > > Finally I managed to make some time to scan several films and now my > scanner > refused to work. > > Switching on the scanner the green LED blinks once, a small 'mechanical' > noise and then comes a buzz tone. Using Vue scan I get the message: > "Scanner not ready" > > Using the Nikon program I get the message: "The scanner has reported a > hardware error. The present function cannot be continued. Sense: > 0x04620000" > > I re-installed the Adaptec SCSI driver software (I'm using my laptop) and > the latest Nikon drivers but that didn't change anything. > > Is my scanner broken now or is there something else I can do? > I would greatly appreciate your help! > > Regards J?rg > > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information >