[Leica] Filter question on Screwmount Leica

[cochranpr at mac.com (David Cochran)]

Jim, thanks for the info. I will check to see about the adapter rings.


peace

david
On Oct 21, 2005, at 9:38 PM, Jim Nichols wrote:

> David,
>
> The outer diameter of my Summitar measures 1 5/8 inches, or 41.7mm.  
> The slip-on adapter that I use is labeled "Kodak Series VI Adapter 
> Ring 1 5/8 in. - 41mm Made in USA".  I've had it for some time, so 
> can't suggest a source, unless you can get to an "old-time" camera 
> shop where these things have accumulated over the years.  I use a 
> short retainer ring or a Series VI shade to secure the filter in 
> place.  If you can find a vented shade, it will present less 
> interference with the viewfinder.  Because I must wear glasses, I 
> normally use an external viewfinder, so the shade does not bother me.  
>  I hope this helps.  Most of the filter sources cited in other 
> responses can supply Series VI filters, often in used but good 
> condition. Personally, I prefer the slip-on adapter over the screw-in 
> type because I have more than one lens in this diameter, but each has 
> its own unique thread size.
>
> Jim Nichols
> Tullahoma, TN USA
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information