Archived posting to the Leica Users Group, 2006/02/13
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]If it's any consolation, my M7 is about to go in for exactly this problem (plus erratic DX reader behavior). >Oh drat. I hope not. But if it does it again it's gonna get sent off. > >Thanks for the info John. > >Adam > >On 2/13/06, John Collier <jbcollier@shaw.ca> wrote: >> The stop arm and stop disc retaining nut may be loose/loosening. >> Internal I am afraid. >> >> John Collier >> >> On 13-Feb-06, at 9:38 AM, Adam Bridge wrote: >> >> > I had the M6ttl out for a walk yesterday and ran through a roll of Tri >> > X. At the end of the roll the spacing between adjacent frames was less >> > than half what it normally should be - as if the film hadn't pulled >> > through correctly. I have a motor M on this camera with new batteries. >> > It wasn't the last frame and subsequent frames were just fine. >> > >> > Do I have a problem? I've never seen this before. >> >> _______________________________________________ >> Leica Users Group. >> See http://leica-users.org/mailman/listinfo/lug for more information >> > > >_______________________________________________ >Leica Users Group. >See http://leica-users.org/mailman/listinfo/lug for more information -- Regards, Dick