Archived posting to the Leica Users Group, 2007/12/13
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Thanks Brian. Since this is presumably of interest to many printers here, I might continue the thread a little. Firstly I have to say that I have the same feeling about the 13x19's as you have expressed on the 17x22's You no doubt have better pricing thereabouts. The A3+ CMSR is something like $7.00 a sheet here! Plus the ink on those ruined sheets, of course. The head strike problem with curl that I mentioned only occurred when I was printing 12x18 on the 13x19. Apparently an unfortunate combination of the paper being less supported exactly at a point (last half inch of the print area) that the print head was off the paper then moving back on. Borderless may well be a workaround. Another question for you. What platen setting are you using? I need to reset this every time the printer is off and on. I may be missing something in how I control the printer there. Cheers, Geoff http://gallery.leica-users.org/v/gh/a/ -----Original Message----- Subject: RE: [Leica] Auto sheet feeder with the Epson 3800 Borderless 13x19 and 8.5x11 inches The 17x22 sheets are so expensive that it feels profligate to stack them in the feeder, so I've never tried. > Brian, what size paper was the CMSR? I have never had a problem with > A4/letter. 13x19 was plagued with curl for me. Head strikes, but only when > printing 12x18 on the 13x19. _______________________________________________ Leica Users Group. See http://leica-users.org/mailman/listinfo/lug for more information