Archived posting to the Leica Users Group, 2009/03/26
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]I see, this is an easy and good way to do it. When I have a lttle time I'll try it, thank you very much! Saludos cordiales Lluis El 26/03/2009, a las 21:26, George Lottermoser escribi?: > I created a "copy set up" > > Camera on tripod with visoflex and lens mounted > Using a piece of graph paper with suitable grid as the subject. > > after exposing one frame > I was able to mark precisely on the grid > the area which the M8 captured > > then viewing that marked area > on the visoflex ground glass > I taped off > that marked section of the grid > using red transparent litho (stripping) tape > > the transparent red tape > works nicely and allows one to view > what is outside the frame > > Regards, > George Lottermoser > george at imagist.com > http://www.imagist.com > http://www.imagist.com/blog > http://www.linkedin.com/in/imagist > > > > > > On Mar 26, 2009, at 3:11 PM, Lluis Ripoll wrote: > >> >> I have two lenses I use with the Visoflex III, the Elmar 65 and the >> Telyt 4/200. How you did the masks on the Visofkex screen to see >> what is framed on the M8?. > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information