Archived posting to the Leica Users Group, 2009/04/13
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Gary, Assuming that the aperture and shutter speed can be set manually on this camera (which appears to be the case, from what I've seen on the internet), you have some good news: Use ANY reversal film (or film that can be developed as a film positive) in this camera. That "limits" you to the remaining Kodachrome 64, almost all the E-6 films (Velvia, Provia, Sensia, Ektachrome, etc.) or black and white film developed as a film positive (such as DR5). Just use a separate exposure meter, and set the camera lens and shutter speeds accordingly. One note: since the camera has a fairly limited shutter speed range, select your film carefully, depending on the likely light conditions. Also, please make sure that you indicate that the film should NOT be mounted in standard 35mm frames. You will need to mount it yourself in 35mm stereo frames for viewing. In the 50s-80s, stereo mounting was available with regular processing. Today, you'll have to source the mounts on the internet and do it yourself. Best, Jim Shulman Wynnewood, PA PS. ASA10 was the speed of Kodachrome when this camera was new--and Kodachrome (for most people) was the only game in town for color slides. ASA 16 was the speed of Type A Kodachrome, used indoors with photoflood (3200K) light. -----Original Message----- From: lug-bounces+jshul=comcast.net at leica-users.org [mailto:lug-bounces+jshul=comcast.net at leica-users.org] On Behalf Of Gary Dalton Sent: Monday, April 13, 2009 1:44 AM To: LUG Subject: [Leica] Question about Film I have a Revere ST 33, a 35mm stereo camera. It's instruction manual indicates that it takes ASA 10 daylight color film or ASA 16 indoor film (plus conversion filters for outdoors). That's it. There's no dial to select other ASA settings. In today's world, what might be my film options and where might I get such film? Would a "modern film" substitue require "pushing" the film during the development process? Any help would be greatly appreciated.