Archived posting to the Leica Users Group, 2010/07/07
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]If your technique is up to it, it works just fine for silver prints or Pt/Pd prints on non-textured surfaces. The pigment dots from a good inkjet printer are very small and to get the density you need they have to overlap. But you can just load your printer with transparency material, hit Ctrl P and expect it to work. Marty On Thu, Jul 8, 2010 at 8:48 AM, Ken Carney <kcarney1 at cox.net> wrote: > Yes, it is essentially the same process. ?I have Dan Burkholder's books, > and > there are some more recent ones on this technique. ?It can work with pt/pd > (or gum dichro or cyanotype etc.) because the paper used, watercolor paper, > hides a multitude of sins. ?It would be nice if it worked for silver > contact > prints, since your burning, dodging and all that would be captured in the > negative. ?Plus no need for an enlarger - you could print with a light bulb > wrapped with kleenex, just like Edward Weston. ?Silver is probably a > stretch, though. > > Ken Carney > > On 7/6/2010 9:12 PM, Jayanand Govindaraj wrote: >> >> Is this the same as this? If so, it has been around for some time: >> >> http://www.danburkholder.com/Pages/main_pages/book_info_main_page1.htm >> >> Cheers >> Jayanand >> >> On Wed, Jul 7, 2010 at 2:13 AM, Tina Manley<images at comporium.net> >> ?wrote: >> >>> >>> LUG: >>> >>> This is interesting: >>> >>> http://www.robgalbraith.com/bins/content_page.asp?cid=7-10053-10768 >>> >>> <http://www.robgalbraith.com/bins/content_page.asp?cid=7-10053-10768>Tina >>> >>> > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information >