[Leica] Image Editing System

[kcarney1 at cox.net (Ken Carney)]

Right, I remember now that the over-screen should be removed.  Seems odd.

Ken

-----Original Message-----
From: lug-bounces+kcarney1=cox.net at leica-users.org
[mailto:lug-bounces+kcarney1=cox.net at leica-users.org] On Behalf Of John
McMaster
Sent: Sunday, June 09, 2013 6:04 PM
To: Leica Users Group
Subject: Re: [Leica] Image Editing System

The shininess does not affect calibration but makes it hard to work on in
some situations. Most of the glossiness can be removed, a suction cup can
pull out the very glossy over-screen leaving a not so shiny one underneath
(it is just held in by magnets) - plus a lot of untidiness.

I had forgotten about that downside, madness from Apple IMO

john
________________________________________


I've never used an iMac, but from what little I've read their monitors are
difficult to calibrate -- too shiny. 

Ken

-----Original Message-----


On Jun 9, 2013, at 8:32 AM, "Ken Carney" <kcarney1 at cox.net> wrote:

> I was following this a little since I'll need an upgrade before long - 
> but it's beginning to look like rebuilding a transmission might be 
> easier :)


you could get a big powerful iMac, or follow Jayanand's advice on a pc.



Steve



_______________________________________________
Leica Users Group.
See http://leica-users.org/mailman/listinfo/lug for more information