Archived posting to the Leica Users Group, 2014/05/01
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Lluis you might have to line up the helical grooves to get it back together. Try turning the focus ring to infinity or to minimum and see if it fits together in those positions. Tka look at another lens for an example. Do not pull the other lens apart. Watch what the brass inside part does when you turn focus off the camera. Cheers Geoff http://www.pbase.com/hoppyman On 2 May 2014 09:50, Lluis Ripoll <lluisripollphotography at gmail.com> wrote: > Thank you John, that's true and shall be considered too. > > Cheers! > Lluis > > El 02/05/2014, a las 01:42, John McMaster <john at mcmaster.co.nz> > escribi?: > > > True, but from here they are all a great distance and the Leica importer > does the international shipping. I could not get suitable insurance inside > NZ, so hand delivered, never mind internationally ;-) > > > > john > > ________________________________________ > > > > Thank you John, I'm considering this possibility, it is one of my > favorite lens, I will see what can I do and I want ask to Will van Manen, I > think they can d o a good work too, much faster and cheaper than Leica. > > > > Cheers > > Lluis > > > > El 02/05/2014, a las 01:27, John McMaster <john at mcmaster.co.nz> > escribi?: > > > >> I did some of my lenses (but not my 75mm Summilux) with flange changes, > but all have since been sent to Leica for calibration and factory > 6-bitting. I would say that the 75mm Summilux is one that is likely to > benefit from a visit to Leica.... Mine was there three times before they > got the focus right ;-) But now, on the Monochrom particularly, it is a > thing of wonder ;-) > >> > >> john > >> ________________________________________ > >> > >> > >> Thank you Steve, but this is a question of the assembling of the lens, > once you disable the rear part the lens is disabled too, I will never do > this again!!! > >> > >> Amiti?s > >> Lluis > >> > >> > >> El 02/05/2014, a las 00:45, Steve Barbour <steve.barbour at gmail.com> > escribi?: > >> > >>> > >>> On May 1, 2014, at 3:41 PM, Lluis Ripoll < > lluisripollphotography at gmail.com> wrote: > >>> > >>>> I have bought a ROXSEN Detachable 6-bit code Leica M Mount to have > coded my Summilux 75mm, but when I've unscrewed the screws the barrel was > dismounted and now I'm unable to mount it again. Before to send to a repair > service, there is some manual on line? ... I didn't found it... > >>> > >>> you may consider contacting Roxsen if possible... > >>> > >>> s > >>>> > >>>> Thank you! > >>>> > >>>> Cheers > >>>> Lluis > >>>> > >>>> > > > > _______________________________________________ > > Leica Users Group. > > See http://leica-users.org/mailman/listinfo/lug for more information > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information >