Archived posting to the Leica Users Group, 2014/07/01

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Firmware M240
From: john at mcmaster.co.nz (John McMaster)
Date: Wed, 2 Jul 2014 03:01:39 +0000
References: <53B3538B.9050708@threshinc.com> <80F9701439F20347874CE5E4E03C22E9E6CD9D54@WhizzMAIL01.whizz.org> <CAE3QcF5pCV6HFXCDwg_dk1cSY9cgmW20PV_FqGc6Op2vKQbGTg@mail.gmail.com> <80F9701439F20347874CE5E4E03C22E9E6CDA0F7@WhizzMAIL01.whizz.org> <CAE3QcF6qnepzFuM57npDP=BEgBu5EOt7Hj0cxPLij2gnGD2sng@mail.gmail.com> <80F9701439F20347874CE5E4E03C22E9E6CDABB4@WhizzMAIL01.whizz.org>, <CAE3QcF7-K=2imbbVcT+Z6cp7F5QpnMHUdtdzLWAuTqEoU7UScQ@mail.gmail.com>

I still have my M9 (and a few others) so not the end of the world... but 
will drop them a note, can also ask them where my 50AA is, over 22 months on 
order!

john
________________________________________


Never hurts to make personal contact with the Customer Care folks as well
that your gear is on its way.
My suggestion anyway.


Cheers
Geoff
http://www.pbase.com/hoppyman


On 2 July 2014 12:54, John McMaster <john at mcmaster.co.nz> wrote:

> All done through NZ distributor, but my dealer may chase things up.....
>
> john
> ________________________________________
>
> Maybe not on the couple of months! Did you talk to Customer Care as well?
>
> Cheers
> Geoff
> http://www.pbase.com/hoppyman
>
>
> On 2 July 2014 11:37, John McMaster <john at mcmaster.co.nz> wrote:
>
> > Sadly that is where my M started it pilgrimage to this morning :-(
> > Suddenly (no drops etc) started close-focussing at less than 5m, so a
> > couple of months before I see it again...
> >
> > john
> > ________________________________________
> >
> >
> > It is homesick for the German summer I tell you! There's a really nice
> cafe
> > in Leitzpark.
> >
> >
> > Cheers
> > Geoff
> > http://www.pbase.com/hoppyman
> >
> >
> > On 2 July 2014 11:01, John McMaster <john at mcmaster.co.nz> wrote:
> >
> > > I can walk outside (open to the sky) for an hour and the GPS does not
> > lock
> > > on :-( This both before and after the 2.0.1.5 firmware....
> > >
> > > john
> > > ________________________________________
> > >
> > > Nah, John.  GPS satellites do not discriminate by hemisphere.  They are
> > > in orbits inclined about 55 degrees to the equator, which means they
> get
> > > farther south than even you. :-)  And farther north than most
> > > Canadians--which reminds me, to all Canadian Luggers, hope you had a
> > > Happy Canada Day!
> > >
> > > Seriously, if you've done the firmware update, it may have reset the
> > > last known position of the camera (to a default of Wetzlar, maybe?).
> > > Which means it has to "see" at least four satellites clearly before it
> > > knows where it is again. Usually there are 7-9 satellites visible at
> any
> > > one time, but they transmit on frequencies that are absorbed by things
> > > that contain water (ie trees, human bodies, etc.), not to mention
> > > building walls and such. So you need to have a clear view of some open
> > > sky for its initial setup, and the more, the better. After that, some
> > > GPS' will use the last known location as an initial guess in its
> > > algorithm, which can help fill in the blanks when less than four
> > > satellites are currently visible. Others don't, and these can be
> > > especially difficult to use indoors, in urbans downtown areas, or in
> > > areas with a lot of RF interference.
> > >
> > > Take the camera outdoors where you can see a lot of sky, and wait a few
> > > minutes, and I suspect all might be well again. I remember when we came
> > > back from a trip to Florida with our GPS. It was raining a lot, so I
> > > didn't take it outside to reset its location.  Then we had to go to a
> > > friend's country house which is so far out in the sticks that its Zip
> > > code is EIEIO.  The GPS "remembered" its last known position, and
> > > insisted that it was in Florida for about 15 minutes, until it saw
> > > enough satellites to realize that it was now a bit north of Seattle.
>  :-)
> > >
> > > --Peter
> > >
> > > ----------
> > >  > Yes, but you are in the northern hemisphere which has quite a few
> more
> > >  > satellites ;-)
> > >  >
> > >  > john
> > >  >
> > >  > ________________________________________
> > >  >
> > >  >
> > >  > On Jul 1, 2014, at 3:34 AM, John McMaster wrote:
> > >  >
> > >  > > I find the GPS very unwilling to lock a signal in Wellington, will
> > be
> > >  > > curious to see how you find things across the ditch....
> > >  >
> > >  > GPS worked pretty well here even before the new firmware.
> > >  >
> > >  > LiveView no longer works on my M ;~(
> > >  >
> > >  > Regards,
> > >  > George Lottermoser
> > >  >
> > >  > http://www.imagist.com
> > >  > http://www.imagist.com/blog
> > >  > http://www.linkedin.com/in/imagist
> > >


Replies: Reply from hopsternew at gmail.com (Geoff Hopkinson) ([Leica] Firmware M240)
In reply to: Message from pklein at threshinc.com (Peter Klein) ([Leica] Firmware M240)
Message from john at mcmaster.co.nz (John McMaster) ([Leica] Firmware M240)
Message from hopsternew at gmail.com (Geoff Hopkinson) ([Leica] Firmware M240)
Message from john at mcmaster.co.nz (John McMaster) ([Leica] Firmware M240)
Message from hopsternew at gmail.com (Geoff Hopkinson) ([Leica] Firmware M240)
Message from john at mcmaster.co.nz (John McMaster) ([Leica] Firmware M240)
Message from hopsternew at gmail.com (Geoff Hopkinson) ([Leica] Firmware M240)