Archived posting to the Leica Users Group, 2017/08/03

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Current State of Displays?
From: sonc.hegr at gmail.com (Sonny Carter)
Date: Thu, 3 Aug 2017 16:19:35 -0500
References: <CAJCexzBsTL6t1feg9aVt7cH6rTj2gTFwHN2GFvh4oxKWSou3dA@mail.gmail.com> <7d3f02cc-0102-7049-1445-a13e53f77887@mejac.palo-alto.ca.us>

Thanks, Brian.  Makes complete sense.

On Thu, Aug 3, 2017 at 1:31 PM, Brian Reid <reid at mejac.palo-alto.ca.us>
wrote:

> There is an electronics/mathematics issue that factors into large
> displays. It's why I have an iMac and not an external display.
>
> At any given time, the computer and electronics industry has some means
> that is the fastest for rapidly and reliably moving data over a cable. USB
> has never been in contention, but FireWire, Thunderbolt, DVI, and Fibre
> Channel have all been candidates for "the fastest and best" at one time or
> another. Ethernet, at any speed, has never been the fastest.
>
> The 5K Retina display has about 15 million pixels. Each pixel can have
> about 10,000 different values (this number is a little soft). So one
> screen-shot on a 5K Retina display is 150 thousand million bits, about 150
> gigabits.
>
> So to keep an iMac Retina display happy you have to feed it about 150
> gigabits for each screen refresh. People like 30 or 60 screen refreshes per
> second.
>
> By putting some fast computing inside the display itself you can get away
> with not having to send the whole 150 gigabits every time. Which is a good
> thing, bdcause 150 gigabits sent 50 times per second is 7500 gigabits per
> second.
>
> If you try to send 7500 gigabits per second over a cable, you run into all
> manner of bad-ass electrical engineering issues. When good electrical
> engineers are speaking in hushed tones of the expertise of a master, they
> sometimes say "she can do terabit connections".
>
> If you have an external display, then you have to have a cable that
> connects your computer to your display. That cable has to have at least one
> connector on it, so that it can plug into the computer. (Often the cable is
> permanently attached to the display to avoid having to use a connector
> there). Connectors are the black beast of high-speed signal transmission.
> They are much more difficult to design than cables, and cables themselves
> are hard.
>
> In an iMac, the circuitry that generates the display signal is about 1
> inch away from the screen, and you can make multiple connections if you are
> tricky. That way you won't have to send the whole 7.5 terabits per second
> over one cable.
>
> It's much easier to design and build the ultra-high-speed transmission
> capability in an all-in-1 design like the iMac than it is to design and
> build something that uses, say, an Eizo air traffic control display
> connected to a computer 5 feet away.
>
> This is more or less why an iMac with a killer screen is just a few
> thousand dollars, while an air-traffic-control display system with 10 good
> screens (though not as good as the iMac) is a few million dollars.
>
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>



-- 
Regards,

Sonny
http://sonc.com/look/
Natchitoches, Louisiana
1714
Oldest Permanent Settlement in the Louisiana Purchase

USA


In reply to: Message from alal at nyu.edu (Akhil Lal) ([Leica] Current State of Displays?)
Message from reid at mejac.palo-alto.ca.us (Brian Reid) ([Leica] Current State of Displays?)