[Leica] Kodak Dektol

[mark at rabinergroup.com (Mark Rabiner)]

Just follow the instructions on the packet. Try not to breath too much of 
the powder as you're pouring it. Better to use a glass gallon jug than thin 
plastic milk jug as it will turn brown less quick (the plastic breaths). If 
it all does not get mixed up perfectly it's no big deal. A few crystals on 
the bottom does not add up to much. They end up disappearing later on down 
the line after you've poured some out.
You'll have less problems with Dektol then with liquids. With liquids you 
can lay out your prints to dry and look and them later and see stains have 
magically appeared on almost all your prints. A major bummer which never 
happens with Dektol. Also its way cheaper per print to use if you do the 
numbers. Do not use it straight in the tray. Dilute it at least 1 to 1 but 1 
to 2 was more common. You'll get plenty of contrast. Probably more contrast 
(in a good way better blacks ) then with a Phenidone liquid. It also lasts 
longer in the tray. One once per 8x10 inch print is a good guide. It's also 
what they tell you in the Kodak material. After that you won't get stains 
you just won't get blacks.
A minute is good for RC paper two minutes for fiber. You might get by with a 
minute and a half with fiber. Use a darkroom timer.

While it's possible to just pour the powder into the jug with a dry funnel 
it?s a big hard to mix it as you can't really stir it and shaking it would 
not be so cool its not a James Bond Martini. So you'd be swirling it and you 
won't get it all.
 It?s a bit better to have a plastic bucket to mix it up in and pour that 
into the jug for your concentrate. And maybe don?t use the bucket for others 
stuff mark it "darkroom".
And get a darkroom stirring rod don't use a kitchen spoon.
Its always something.

 
 

-- 

Mark William Rabiner
Photographer

?On 11/14/18, 5:46 PM, "LUG on behalf of Lluis Ripoll via LUG" 
<lug-bounces+mark=rabinergroup.com at leica-users.org on behalf of lug at 
leica-users.org> wrote:

    +1
    Lluis
    
    
    > El 14 nov 2018, a les 23:14, Mark Kronquist via LUG <lug at 
leica-users.org> va escriure:
    > 
    > Simple enough for generations of Photo 101 students, good enough for 
thousands of professionals, As an all around developer it is hard to find a 
better one for everyday use. Go for it.
    > 
    >> On Nov 14, 2018, at 1:35 PM, Dan Khong via LUG <lug at 
leica-users.org> wrote:
    >> 
    >> Friends
    >> 
    >> My local photo and darkroom supplier recently ran out of Ilford MG 
print
    >> developer and suggested Dektol instead. I've not used powdered 
developers
    >> for a long time and Dektol is new to me.
    >> 
    >> Apart from the usual instructions on the packaging, I will appreciate 
any
    >> pearls of wisdom you folks have learned while handling it.
    >> 
    >> Many thanks.
    >> 
    >> Dan K.
    >> 
    >> _______________________________________________
    >> Leica Users Group.
    >> See http://leica-users.org/mailman/listinfo/lug for more information
    > 
    > 
    > _______________________________________________
    > Leica Users Group.
    > See http://leica-users.org/mailman/listinfo/lug for more information
    
    
    _______________________________________________
    Leica Users Group.
    See http://leica-users.org/mailman/listinfo/lug for more information