Archived posting to the Leica Users Group, 2000/09/26

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] Pensees
From: Javier Perez <summarex@yahoo.com>
Date: Tue, 26 Sep 2000 05:06:42 -0400
References: <B5F582BE.140B4%mlquinn@san.rr.com>

Surely there must be a story about a
guy with 1 hand who could reload and shoot
with an M3 without any problem.
Javier

Mike Quinn wrote:

> A few answers:
>
> Joe Sobel asked:
>
> > 1. If Leicas have a theoretically unlimited life, even if digital
> > did not take over, would prices eventually come down on used gear anyway
> > - it would seem that with an unlimited number of M6s to be produced,
> > there would be a glut.>>
>
> No Glut:  the rate at which Leica collectors are produced has always greatly
> exceeded the rate at which the cameras were produced...
>
> > 3. If an M3 had no framelines, would the field be equivalent to a 40mm lens?
>
> Not Quite. But what you see when you move your eye from side to side until
> the 50 mm frame lines disappear does approximate the 40 mm coverage.
>
> > 5.    Just what is Vulcanite and how do they apply it so evenly at the
> > factory?  Is it a liquid which is then embossed while on the parts?!>>
> >
> Check the archives on this one. It's a pre-formed shell of now unavailable
> composition material that was bonded to the body by heat (hence
> "vulcanite").
>
> > 6.    Is it really easier to load an M3 than an M4?
>
> Yes, but it helps to have more than two hands.
> The optimum number of hands is 8:
>
> 1 hand to hold the camera
> 1 hand to hold the film canister
> 1 hand to remove the top of the canister
> 1 hand to remove the film from the canister and then hold the film
> 1 hand to remove and hold the camera base-plate
> 1 hand to remove and hold the take-up spool
> 1 hand to insert the film tongue into the take-up spool
> 1 hand to open the back door (which has fallen closed as you did the above)
>
> Most people lack eight hands, so they either seek help, stuff things into
> various orifices, or drop the film canister, the top of the film canister,
> the base plate, or the take-up spool.
>
> Of course this M3 procedure is (as you note) far easier than the one on the
> M4 in which you have to accomplish essentially the same thing in the dark
> and inside the camera body since the take-up spool cannot be removed...
>
> Hope this helps,
> Mike Quinn


__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com

In reply to: Message from Mike Quinn <mlquinn@san.rr.com> (Re: [Leica] Pensees)