Archived posting to the Leica Users Group, 2000/11/03

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] M rangefinder adjustment, topless or not? part one
From: John Collier <jbcollier@home.com>
Date: Fri, 03 Nov 2000 16:41:04 -0700

First of all I think that both Walt and Jim are completely correct. The most
common rangefinder adjustments are:

- - the rangefinder distance calibration, comprising infinity and close focus
adjustments, and

- - the rangefinder vertical alignment.

All these adjustments can be done without the top plate coming off.

The vertical alignment is adjusted through the "red dot" on cameras equipped
with it, otherwise through the cover screw located directly above the lens
mount. In the early cameras, it is a simple adjusting screw but on the later
cameras (M4-2 and up) it is an eccentric cam that requires a special tool.

The rangefinder distance calibration is done by the eccentric pivot of the
rangefinder arm and the eccentric mounting screw of the rangefinder arm
roller. The roller position determines the starting point of the rangefinder
arm travel (infinity) and the eccentric pivot adjusts the ratio of
rangefinder movement to lens cam movement by varying the length of the arm.
A shorter arm gives you a larger movement of the rangefinder pivot for a
specific amount of lens cam movement; and, a longer arm gives you less
movement of the rangefinder pivot for a specific amount of lens cam
movement. Simple! There are also rangefinder travel stops but we hardly have
to go into that now.

see part two