Archived posting to the Leica Users Group, 2001/10/04
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Dans un courrier daté du 04/10/01 15:57:35 Paris, Madrid (heure d'été), dennis@hale-pohaku.com a écrit : > Dear Luggers, > > > > this is regarding leica M lens cam. > > Instead of grinding the lens cam, [for example on M2, so that the 50mm > lens > > will show 35mm frame (this is just an example)], is there any way to do > the > > opposite? somehow adding the cam a little bit (around 0.5mm)? > > > > I have one particular lens that not showing exactly 50mm frame, just > shifted > > a bit towards 35mm. I don't want to adjust the camera frame showing > > adjustement since all my other lenses are showing the frames properly. > > > > Will some epoxy/glue be acceptable? > > > > thanks in advance > > -- > > hans > Hans . Try sticking a small piece of aluminum tape over it . But franckly , in that case I'd prefer to have the camera adjusted . Your cmaera is probably " on the edge " concerning frames selection . Jo Goodtimes , France - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html