Archived posting to the Leica Users Group, 2001/11/20
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]> Steve, thanks. My particular M2 appears to have an > after-market rewind knob fitted to the rewind shaft > via two set screws. It does not have the standard > knurled knob of other M2s have seen. I should have > mentioned this. Sorry. > > Regards, Doug Yes I know about the rewind crank but that fits on the knob, inside the knob is a shaft that turns as you advance the film and there should be 2 dots which will let you see the shaft turn. sl > > > --- Steve LeHuray <icommag@toad.net> wrote: >> >> > However, since the rewind knob on my m2 does not >> turn >> > as film is advanced I load the film, put the >> bottom >> > on, advance one frame and then open it back up to >> > check that the film has advanced properly, if so, >> I >> > close it back up, advance a couple of frames, set >> > counter to 0 and carry on. Is there a better way? >> > >> > -Doug Lee >> > >> >> >> Doug, >> >> True the M2 knob itself does not turn, but look >> inside the rewind knob and >> you will see two dots, watch these turn as you >> advance the beginning of a >> roll and every time you advance--then you are set to >> go with no need to open >> up bottom. >> >> sl >> -- >> To unsubscribe, see > http://mejac.palo-alto.ca.us/leica-users/unsub.html > > > __________________________________________________ > Do You Yahoo!? > Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. > http://geocities.yahoo.com/ps/info1 > -- > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html > - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html