Archived posting to the Leica Users Group, 2002/03/06
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]The beeping indicates that the camera is set for double exposure when the rewind button is pushed in. If it isn't but it beeps anyway the beeper switch in the winder must be stuck in the closed position. Take it apart and check the switch. You could also cut the ground wire to the beeper. Javier Marc Attinasi wrote: > > I recently picked up a winder R4 for my R4 and I've put the 6 batteries > in and attached it. For some reason, when I press the shutter down, or > press in the button to change exposure modes, it beeps at me. How do I > stop this noise? It works fine (i.e.. it shoots, winds the film and > cocks the shutter) but I cannot walk around beeping my beeping SLR off > all day. The R4 manual has nothing on this AFAICT, and I checked the > battery voltage and it is 9.14VDC, which seems good. > > Thanks for any advice, > - marc > > -- > *** Marc Attinasi *** > * mailto: marc@attinasi.org * > * http://www.attinasi.org * > > > -- > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html