Archived posting to the Leica Users Group, 2002/03/27

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] 03/25/02 - Memo Re: Replacement Of Mouse Balls
From: "geebeespaw" <geebeespaw@btopenworld.com>
Date: Wed, 27 Mar 2002 08:57:02 -0000
References: <20020326230631.91875.qmail@web21303.mail.yahoo.com> <007401c1d51f$2991ad80$633f4d18@gv.shawcable.net>

> Photo Phreak  explained: ;-)
> >So what?  Somethings are merely meant to take the
> > weight of the world off our shoulders.
> >
> >     Now fix that hot chocolate, add the peppermint
> > Schnapps, and have a laugh or two.........<<<<<<<<


From: "Ted Grant" <tedgrant@shaw.ca>
 Hi Photo Phreak,
>  I'm with you, certainly how this site has been peeing on itself for the
> past few weeks.
========================================================
 The mouse ball memo may be old but I had not heard it before and I am with
the Ted and Photo Phreak when they assert that if we are going off topic we
may as well have a chuckle. A version of this was told by Gerard Hoffnung at
the Oxford Union, December 4th, 1958, I offer it for the same reason:

"I am writing in response to your request for additional information for
block number 3 of the accident reporting form. I put 'poor planning' as the
cause of my accident. You said in your letter that I should explain more
fully and I trust the following detail will be sufficient.
I am an amateur radio operator and on the day of the accident, I was working
alone on the top section of my new 80-foot tower. When I had completed my
work, I discovered that I had, over the course of several trips up the
tower, brought up about 300 pounds of tools and spare hardware. Rather than
carry the now un-needed tools and material down by hand, I decided to lower
the items down in a small barrel by using a pulley, which was fortunately
attached to the gin pole at the top of the tower.
Securing the rope at ground level, I went to the top of the tower and loaded
the tools and material into the barrel. Then I went back to the ground and
untied the rope, holding it tightly to ensure a slow descent of the 300
pounds of tools. You will note in block number 11 of the accident reporting
form that I weigh only 155 pounds. Due to my surprise of being jerked off
the ground so suddenly, I lost my presence of mind and forgot to let go of
the rope. Needless to say, I proceeded at a rather rapid rate of speed up
the side of the tower. In the vicinity of the 40 foot level, I met the
barrel coming down. This explains my fractured skull and broken collarbone.
Slowed only slightly, I continued my rapid ascent, not stopping until the
fingers of my right hand were two knuckles deep into the pulley.
Fortunately, by this time, I had regained my presence of mind and was able
to hold onto the rope in spite of my pain. At approximately the same time,
however, the barrel of tools hit the ground and the bottom fell out of the
barrel. Devoid of the weight of the tools, the barrel now weighed
approximately 20 pounds. I refer you again to my weight in block number 11.
As you might imagine, I began a rapid descent down the side of the tower. In
the vicinity of the 40 foot level, I met the barrel coming up. This accounts
for the two fractured ankles and the lacerations of my legs and lower body.
The encounter with the barrel slowed me enough to lessen my injuries when I
fell onto the pile of tools and, fortunately, only three vertebrae were
cracked.
I am sorry to report, however, that as I lay there on the tools, in pain,
unable to stand and watching the empty barrel 80 feet above me, I again lost
my presence of mind. I let go of the rope..."


Graham
http://geebeephoto.com



- --
To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html

In reply to: Message from Photo Phreak <leicam4pro@yahoo.com> (Re: [Leica] 03/25/02 - Memo Re: Replacement Of Mouse Balls)
Message from Ted Grant <tedgrant@shaw.ca> (Re: [Leica] 03/25/02 - Memo Re: Replacement Of Mouse Balls)