Archived posting to the Leica Users Group, 2003/07/26
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Hi Vick: I thought there might be some wires inside that might not handle higher voltage. Guess there aren't. Ted - ----- Original Message ----- From: "Vick Ko" <vick.ko@sympatico.ca> To: <leica-users@mejac.palo-alto.ca.us> Sent: Saturday, July 26, 2003 6:08 PM Subject: Re: [Leica] Flash on M3 - help > I'd be curious for the answer. > > As far as I know, there aren't any electricals in an M3 - only the > make/break contact for the flash circuit. > > Is it arcing across contacts that you are worried about? > > regards, > Vick > > Ted Bayer wrote: > > >I don't use flash much - so I have a question for you. > > > >I know the Vivitar 283 is OK to use on the M3. My question is, do you have > >to be careful which flash you use? My concern is - are there some flashes > >that should not be used because the voltage may be too high - fry the > >electricals in the camera? > > > >May be a dumb question, but I am seriously concerned and would like to know. > > > >Thanks. > > > >Ted > > > > > >-- > >To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html > > > > > > > > > -- > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html > - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html