Archived posting to the Leica Users Group, 2005/01/19
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]The only way I ever got my IIIc from not putting the image up against the sprockets was to use Leitz film cassettes. The film spacing error sounds like CLA time. Hope this helps, Curtis ----- Original Message ----- From: Glenn Stauffer To: Leica Users Group Sent: Wednesday, January 19, 2005 3:40 PM Subject: [Leica] Leica IIIc film loading question Ran a roll of B&W through my IIIc to check that the shutter was working OK and noticed a few things wrong with the way the film fed through the camera. The frames run together and the image extends up against and slightly into the sprockets on the frame number side. Not consistently either. Does this sound like I wasn't careful to ensure that the sprockets were engaged when I loaded the camera? I'm thinking I ought to send it off for a CLA sometime. There is someone in the Carolinas or Virginia who does a good job with screw mount Leica's, isn't there? Glenn _______________________________________________ Leica Users Group. See http://leica-users.org/mailman/listinfo/lug for more information