Archived posting to the Leica Users Group, 2009/10/20

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Fender Bender
From: Frank.Dernie at btinternet.com (Frank Dernie)
Date: Tue, 20 Oct 2009 08:59:14 +0100
References: <4ADB4732.5090602@panix.com> <F74547E8FBC64AEB9D0EE2D2FC4066F4@jimnichols> <4ADCD286.50803@san.rr.com>

Hi Jerry,
I have been working with Carbon-Epoxy since 1982. It requires a  
different mind set to design with it than used for metals, for example  
any fibre reinforced structure is not really suitable for rivets,  
though non-expanding rivets which -can- be used are nowadays readily  
available. These are more for the benefit of traditional construction  
than suitableness-for-purpose though. How resilient a component is  
depends on design and material choice, as usual, it just needs a  
greater depth of knowledge to exploit than do metals. The Aeronautical  
industry is rightly very conservative...
I have used carbon epoxy springs which are very light.
Frank D.


On 19 Oct, 2009, at 21:56, Jerry Lehrer wrote:

> Jim and Rei,
>
> Carbon composite has about zero ductility.  Carbon -epoxy composite  
> is what the Boeing 787  is made of.
> I work with that stuff every day.  It doesn't bend-- IT BREAKS.
>
> Jerry
>
>
> Jim Nichols wrote:
>> My condolences.  I can't figure how that area could have been  
>> struck, leaving other surrounding areas unmarked.
>>
>> Jim Nichols
>> Tullahoma, TN USA
>> ----- Original Message ----- From: "Rei Shinozuka" <shino at panix.com>
>> To: "Leica Users Group" <lug at leica-users.org>
>> Sent: Sunday, October 18, 2009 11:49 AM
>> Subject: [Leica] Fender Bender
>>
>>
>>> unfortunately, my fender
>>>
>>> http://gallery.leica-users.org/v/shino/album_002/L1030119.JPG.html
>>>
>>> DLUX4
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information



In reply to: Message from shino at panix.com (Rei Shinozuka) ([Leica] Fender Bender)
Message from jhnichols at lighttube.net (Jim Nichols) ([Leica] Fender Bender)
Message from glehrer at san.rr.com (Jerry Lehrer) ([Leica] Fender Bender)