Archived posting to the Leica Users Group, 2012/10/18

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] MUCH Better! 617 Tests
From: leowesson at gmail.com (Leo Wesson)
Date: Thu, 18 Oct 2012 22:09:47 -0500
References: <CCA63A39.25018%mark@rabinergroup.com>

Could be the scanner...

Leo Wesson
www.leowesson.com

On Oct 18, 2012, at 21:59, Mark Rabiner <mark at rabinergroup.com> wrote:

> Its not a pressure plate issue as that would be scratching the base side 
> and
> you'd have a white line not black line. Its between the film and the front
> of the camera.
> 
> Mark William Rabiner
> Photography
> http://gallery.leica-users.org/v/lugalrabs/
> 
> 
>> From: Richard Man <richard at richardmanphoto.com>
>> Reply-To: Leica Users Group <lug at leica-users.org>
>> Date: Thu, 18 Oct 2012 19:50:35 -0700
>> To: Leica Users Group <lug at leica-users.org>
>> Cc: Mark William Rabiner <mark at rabinergroup.com>, Frank Filippone
>> <red735i at earthlink.net>
>> Subject: [Leica] MUCH Better! 617 Tests
>> 
>> Alright, these look much better:
>> 
>> 150mm Fuji @F32
>> http://richardmanphoto.com/PICS/20121019-Scanned-12.jpg
>> 
>> 90mm Fuji @F32
>> http://richardmanphoto.com/PICS/20121019-Scanned-13.jpg
>> 
>> Thank you all for indulging my long winded posting and helping me to get
>> this right, especially to Frank and Mark.
>> 
>> I'm not entirely how I eff'ed up yesterday but at least I know if I dot 
>> all
>> the I's and cross all the T's, I can do this.
>> 
>> I will make some sample print, just to see.
>> 
>> Now there is just one problem, ALL negatives so far have a horizontal line
>> across, just slightly below the bottom third, I believe. You can see this
>> in the enlarged section:
>> http://richardmanphoto.com/PICS/20121019-Scanned-13-1.jpg
>> 
>> I saw that yesterday already and I triple-cleaned the film holder and the
>> darkslide and I don't know where it may come from.
>> 
>> p.s. I checked the film flatness in the holder, and it really should not 
>> be
>> an issue as the pressure plate should hold the film fairly tight against
>> the film rails.
>> 
>> Thanks again!!
>> 
>> -- 
>> // richard <http://www.richardmanphoto.com>
>> 
>> _______________________________________________
>> Leica Users Group.
>> See http://leica-users.org/mailman/listinfo/lug for more information
> 
> 
> 
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information


Replies: Reply from richard at richardmanphoto.com (Richard Man) ([Leica] MUCH Better! 617 Tests)
In reply to: Message from mark at rabinergroup.com (Mark Rabiner) ([Leica] MUCH Better! 617 Tests)