Archived posting to the Leica Users Group, 2013/06/05

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] DMR-Leica service
From: gpinkcp at msn.com (Gary Pinkerton)
Date: Wed, 5 Jun 2013 23:39:42 -0500
References: <1519653420.2744441370450048601.JavaMail.root@dsmdc-mail-mbs12>, , <1338278479.2744641370450099276.JavaMail.root@dsmdc-mail-mbs12>, <BLU170-W3CDB212721FC50C5613C8AD980@phx.gbl>

I'll add that Carmen Vargas, @ Leica NJ,
was one of the nicest, most helpful people, I've ever dealt with, anywhere !

> From: gpinkcp at msn.com
> To: lug at leica-users.org
> Date: Wed, 5 Jun 2013 23:32:28 -0500
> Subject: Re: [Leica] DMR-Leica service
> 
> Yep, sent R8 and DMR.
> I tried numerous times to clean contacts, which I hoped would do trick as 
> per usual.
> But somehow they weren't connecting properly. Applying pressure upwards on 
> the power unit at contact area, would fire it right up.
> But the instant pressure was removed, it would die again :(
> 
> > Date: Wed, 5 Jun 2013 11:34:59 -0500
> > From: grduprey at mchsi.com
> > To: lug at leica-users.org
> > Subject: Re: [Leica] DMR-Leica service
> > 
> > You could have just taken a couple of cotton swabs with alcohol and 
> > cleaned them yourself.  Five minutes and done.  But it is good to hear 
> > they are still doing some repair work.  I may just have to send mine in 
> > and see if they can fix the Motor Drive issue.  Did you send in the R8/9 
> > body also or just the DMR?
> > 
> > Gene
> > 
> > ----- Original Message -----
> > From: "Gary Pinkerton" <gpinkcp at msn.com>
> > To: lug at leica-users.org
> > Sent: Tuesday, June 4, 2013 8:38:53 PM GMT -06:00 US/Canada Central
> > Subject: [Leica] DMR-Leica service
> > 
> > The contacts between the power unit and sensor back were not making a 
> > connection. I sent to NJ, and a couple weeks later, they called, said 
> > they'd send to Germany.
> > Couple more weeks I got another call (and written 'estimate')
> > They would clean and adjust DMR, no cost and no warranty.
> > The DMR came back today (2 months total that it was gone). It works 
> > beautifully, and to my surprise, they either refinished the housing, or 
> > replaced. It looks brand new. 
> > It had been scratched, dinged, and scraped. 
> > We hear some not so good stories about Leica service, so I thought I'd 
> > throw in a good one :)
> > 
> > > From: sonc.hegr at gmail.com
> > > Date: Tue, 4 Jun 2013 20:24:01 -0500
> > > To: lug at leica-users.org
> > > Subject: Re: [Leica] Fuji XE-1
> > > 
> > > I was a Kaypro man.
> > > 
> > > 
> > > On Tue, Jun 4, 2013 at 8:12 PM, Bob Adler <rgacpa at gmail.com> wrote:
> > > 
> > > > Remember the Osborne?
> > > >
> > > > Sent from my iPad
> > > >
> > > > On Jun 4, 2013, at 6:03 PM, "Jim Nichols" <jhnichols at 
> > > > lighttube.net> wrote:
> > > >
> > > > > Speak for yourself, Ken.  I started with CP/M, then DOS. ;~)
> > > > >
> > > > > Jim Nichols
> > > > > Tullahoma, TN USA
> > > > > ----- Original Message ----- From: "Ken Carney" <kcarney1 at 
> > > > > cox.net>
> > > > > To: "'Leica Users Group'" <lug at leica-users.org>
> > > > > Sent: Tuesday, June 04, 2013 8:00 PM
> > > > > Subject: Re: [Leica] Fuji XE-1
> > > > >
> > > > >
> > > > >> Sort of like buying a maxed-out PC and using DOS.  Oh wait, no 
> > > > >> one on
> > > > this
> > > > >> list is old enough to know what DOS was.
> > > > >>
> > > > >> Ken
> > > > >>
> > > > >> -----Original Message-----
> > > > >> From: lug-bounces+kcarney1=cox.net at leica-users.org
> > > > >> [mailto:lug-bounces+kcarney1=cox.net at leica-users.org] On 
> > > > >> Behalf Of
> > > > Robert G
> > > > >> Adler
> > > > >> Sent: Tuesday, June 04, 2013 7:05 PM
> > > > >> To: Leica Users Group
> > > > >> Subject: Re: [Leica] Fuji XE-1
> > > > >>
> > > > >> It's like keeping your Costco prints and throwing out your 
> > > > >> negatives!
> > > > >> Every time you save a jpg you lose information. Also software 
> > > > >> improves
> > > > but
> > > > >> without your raw file you cant take advantage of that improvement.
> > > > >> Ansel worked on prints from the Moon Over Hernandez negative for
> > > > decades. No
> > > > >> two prints are exactly alike. He couldn't do that saving jpgs 
> > > > >> only.
> > > > >> Cards/memory is cheap. You can save both simultaneously with just 
> > > > >> some
> > > > loss
> > > > >> on write time. Why not save the raw too since there is a lot you 
> > > > >> stand
> > > > to
> > > > >> loose?
> > > > >> Bob
> > > > >>
> > > > >> Bob Adler
> > > > >>
> > > > >> On Jun 4, 2013, at 4:13 PM, mehrdad <msadat at gmail.com> wrote:
> > > > >>
> > > > >>> the jpgs from fuji are so good, i don't know why i should shoot 
> > > > >>> raw,
> > > > >>> so far both phase one and lr are compared against the in camera 
> > > > >>> jpgs
> > > > >>> by most reviewers and jpgs stand out
> > > > >>>
> > > > >>> -------------------------------------
> > > > >>> regards, mehrdad
> > > > >>>
> > > > >>>
> > > > >>> On Tue, Jun 4, 2013 at 3:56 PM, Bob Adler <rgacpa at gmail.com> 
> > > > >>> wrote:
> > > > >>>
> > > > >>>> Except he doesn't shoot raw!
> > > > >>>>
> > > > >>>> Sent from my iPad
> > > > >>>>
> > > > >>>> On Jun 4, 2013, at 9:51 AM, Jayanand Govindaraj <jayanand at 
> > > > >>>> gmail.com>
> > > > >>>> wrote:
> > > > >>>>
> > > > >>>>> Nice review:
> > > > >>>> http://theonlinephotographer.typepad.com/the_online_photographer/2013
> > > > >>>> /06/fuji-x-e1-the-keeper.html
> > > > >>>> theonlinephotographer.typepad.com/the_online_photographer/2013/06/fuj
> > > > >>>> i-x-e1-the-keeper-part-ii.html
> > > > >>>>>
> > > > >>>>> Cheers
> > > > >>>>> Jayanand
> > > > >>>>>
> > > > >>>>> _______________________________________________
> > > > >>>>> Leica Users Group.
> > > > >>>>> See http://leica-users.org/mailman/listinfo/lug for more 
> > > > >>>>> information
> > > > >>>>
> > > > >>>> _______________________________________________
> > > > >>>> Leica Users Group.
> > > > >>>> See http://leica-users.org/mailman/listinfo/lug for more 
> > > > >>>> information
> > > > >>>
> > > > >>> _______________________________________________
> > > > >>> Leica Users Group.
> > > > >>> See http://leica-users.org/mailman/listinfo/lug for more 
> > > > >>> information
> > > > >>
> > > > >> _______________________________________________
> > > > >> Leica Users Group.
> > > > >> See http://leica-users.org/mailman/listinfo/lug for more 
> > > > >> information
> > > > >>
> > > > >>
> > > > >> _______________________________________________
> > > > >> Leica Users Group.
> > > > >> See http://leica-users.org/mailman/listinfo/lug for more 
> > > > >> information
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Leica Users Group.
> > > > > See http://leica-users.org/mailman/listinfo/lug for more 
> > > > > information
> > > >
> > > > _______________________________________________
> > > > Leica Users Group.
> > > > See http://leica-users.org/mailman/listinfo/lug for more information
> > > >
> > > 
> > > 
> > > 
> > > -- 
> > > Regards,
> > > 
> > > Sonny
> > > http://sonc.com/look/
> > > Natchitoches, Louisiana
> > > 
> > > USA
> > > 
> > > _______________________________________________
> > > Leica Users Group.
> > > See http://leica-users.org/mailman/listinfo/lug for more information
> >                                       
> > 
> > _______________________________________________
> > Leica Users Group.
> > See http://leica-users.org/mailman/listinfo/lug for more information
> > 
> > _______________________________________________
> > Leica Users Group.
> > See http://leica-users.org/mailman/listinfo/lug for more information
>                                         
> 
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
                                          


In reply to: Message from grduprey at mchsi.com (grduprey at mchsi.com) ([Leica] DMR-Leica service)
Message from gpinkcp at msn.com (Gary Pinkerton) ([Leica] DMR-Leica service)