Archived posting to the Leica Users Group, 2017/08/16

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Film exposure error - how to correct it
From: mark at rabinergroup.com (Mark Rabiner)
Date: Wed, 16 Aug 2017 12:02:18 -0400
References: <6d78d76f-12f9-6478-b8b4-4c7eede3176f@summaventures.com> <18A13473-386A-4218-823C-59E0F269E206@icloud.com>

You need a two-stop push. Lots of custom labs can do that. You?ll still have 
very thin shadows if they?re there at all but at least your film will not be 
under developed and can be printed with normal grades of paper.
You may get a few viable images off the roll.

 
 

-- 

Mark William Rabiner
Photographer

On 8/16/17, 5:53 AM, "LUG on behalf of Gerry Walden" 
<lug-bounces+mark=rabinergroup.com at leica-users.org on behalf of 
gerry.walden at icloud.com> wrote:

    My advice would be to talk to the lb guy at Ilford, I feel sure he will 
give it the best treatment.
    
    Gerry
    
    Gerry Walden LRPS
    www.gwpics.com
    +44 (0)23 8046 3076 or
    +44 (0)797 287 7932
    
    
    
    
    
    
    > On 16 Aug 2017, at 10:21, Peter Dzwig <pdzwig at summaventures.com> 
wrote:
    > 
    > All,
    > 
    > I put my M3 back in to use over the vacation. I was exposing the film 
in it as
    > ASA400 assuming that I had one of my usual films in it.
    > 
    > HOWEVER ( :-( ) I found that I had a roll of 125 ASA FP4+ in it when I 
came to
    > the end of the roll. When I started using it I had noticed that I had 
already
    > exposed some 10 frames. So I have 10 frames exposed at 125 ASA and 25 
- or
    > thereabouts - exposed as 400 ASA. Most of the shots taken when I was 
assuming it
    > was 400 were exposed in the region of f8 - f16 at 1/500th.
    > 
    > I send film to Ilford to process. My question is: how should I tell 
them to
    > develop it?
    > 
    > I think I have the following options:
    > 
    > (i) DON'T - just bin it and write it off to bad luck!
    > 
    > (ii) Develop it as (say) 200 ASA, accept that some will be 
under-exposed and
    > that the rest will be over exposed and sort it out when I scan the 
film and play
    > with it in PS or NikFX (or whatever). The short exposure times on the 
400 ASA
    > shots may help as they will be on he darker side.
    > 
    > (iii) Develop it as one or the other (125 or 400 ASA)
    > 
    > Any other thoughts/recommendations?
    > 
    > Peter
    > 
    > PS I know that I should shoot a whole roll before i forget what the 
film is and
    > go off on autopilot :-)
    > -- 
    > 
    > ===========================================================
    > Dr Peter Dzwig                            
    > 
    > 
    > _______________________________________________
    > Leica Users Group.
    > See http://leica-users.org/mailman/listinfo/lug for more information
    
    
    _______________________________________________
    Leica Users Group.
    See http://leica-users.org/mailman/listinfo/lug for more information
    




Replies: Reply from roark.paul at gmail.com (Paul Roark) ([Leica] Film exposure error - how to correct it)
In reply to: Message from pdzwig at summaventures.com (Peter Dzwig) ([Leica] Film exposure error - how to correct it)
Message from gerry.walden at icloud.com (Gerry Walden) ([Leica] Film exposure error - how to correct it)