Archived posting to the Leica Users Group, 2018/12/04
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]I would suggest another adapter. As for the current misbehaving adapter it is either the locking lug not seating because the receiving hole is just slightly out of place or one of the four locking lugs is just a tad large. If you feel in need of a project then darken the back of the adapter including the sides of the lugs with a sharpie or dark magic marker. Seat the adapter on your M10 and look for the wear marks or lack therof. On Mon, Dec 3, 2018 at 11:10 PM Mark Kronquist via LUG <lug at leica-users.org> wrote: > I?d just buy a new adapter. I use a slug of them Leica and third party and > have not had an issue with Film or Digital M cameras > > > > On Dec 3, 2018, at 7:10 PM, Peter Klein via LUG <lug at leica-users.org> > wrote: > > > > I was checking various lenses on my M10-P today, and discovered that one > of my LTM to M adapters doesn't quite work. It's a 28/90 adapter, not > encodable, probably Voigtlander, but made before they branded them. It has > worked well on my previous Leicas, both film and digital. It was always a > little more reluctant to click into place than my other LTM/M adapters, and > I think that may be the problem. > > > > On the M10-P, the adapter mounts, and the lens selector lever moves into > position. The rangefinder appears to focus. But the camera's lighted > framelines never appear. And when I try to take a shot or go into LIve > View, the camera's LDC screen tells me that no lens is mounted. I've also > seen a message in the viewfinder that looks like "bc." > > > > This happens only with this one specific adapter, no matter what lens is > attached to it. My guess is that it is not quite turning far enough, and > something is not happening that the camera tests for its "Is a lens > mounted?" routine. > > > > Could I remedy this problem by filing something down slightly on the > adapter? (Probably the stop that halts the lens from turning further when > mounting). Can anyone point me to the place to file, or an article that > describes it? And would be advisable, or should I just spring for a new > adapter to avoid messing something up in the camera? > > > > --Peter > > > > > > _______________________________________________ > > Leica Users Group. > > See http://leica-users.org/mailman/listinfo/lug for more information > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information -- Don don.dory at gmail.com