Archived posting to the Leica Users Group, 2006/11/15
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]The Coolscan negative holder seems to do the trick as well. Uncut strips of six slide in flat and aligned Walt. Tina Manley wrote: > At 01:25 AM 11/15/2006, you wrote: > >> Thanks, I had a fairly long end on the film, I did trim it and the >> problem became worse: perhaps I did not square off the edges, but >> really this is silly, I should be able to "direct" the scanner to >> start scanning where I want to. I try skype later, but I notice you >> are off line at the moment >> >> cheers > > > Alastair - I solve all of those alignment problems by mounting my B&W > negatives in slide mounts. The Gepe and Wess mounts hold the film > flat and with the bulk loader for the LS5000 you can scan 40 slides at > a time. Since the negatives are mounted individually in slide mounts, > you can also file them in slide pages by subject and edit out all of > the ones that belong in the round file. > > Tina > > Tina Manley, ASMP, NPPA > http://www.tinamanley.com > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information >