Archived posting to the Leica Users Group, 2013/10/02
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Auto ISO is normally best used with auto-exposure. As Herb said, a 3rd variable to control the exposure. With the M9, you can set the max/min range, whether it's lens dependent (kicks in when it's 1/focal length) or an absolute number you set. On the M9, it works in both auto-exposure and manual exposure modes. Remember the meter is still mainly a semi-spot meter. I use it most the time for snapshots, even on manual mode. I set the max to ISO 1250. Most of my prints are not being blown up so this is fine. For landscape shot, I set the ISO manually. On Wed, Oct 2, 2013 at 12:02 PM, John McMaster <john at mcmaster.co.nz> wrote: > You are not alone ;-) Well I use it on snap cameras where I have less > control/concern but not on the Leica's > > john > > > -----Original Message----- > > > > I think I'm the only naysayer on this, but I would never use auto ISO. > It > > makes no sense to me! > > > > Leo Wesson > > www.leowesson.com > > > > > On Oct 1, 2013, at 23:30, Herbert Kanner <kanner at acm.org> wrote: > > > > > > I thought a few words about how this function operates on Leica, at > least > > on the M9, might be useful to y'all, since the Leica Manual is not the > clearest > > on this subject. > > > > > > Let's start with an understanding of the relationship between the three > > parameters: ISO, f-number, and shutter speed. We are used to thinking of > > exposure having one degree of freedom for a correct exposure. That is > > because we are used, from years of experience with film, of thinking of > ISO > > being a constant. You can't change ISO in the middle of a roll of film. > So, for > > any situation, there is one degree of freedom for a "correct" exposure: > you > > change shutter speed, you have to change aperture, and vice versa. Hence, > > for the little all-electronic cameras where both the aperture and > shutter are > > under computer control, you can choose the aperture (aperture preferred), > > or you can chose the shutter speed (shutter speed preferred) and the > > camera choses the one you didn't chose. You all know this; I'm just being > > pedantic. Oh, then these idiot cameras have "programmed" mode where > > the camera chooses both based on some arcane set of rules. That's for > > bozos. > > > > > > Now, lets look at the Leica. The camera can control the shutter, but > it can't > > control the aperture. So the only automatic mode would appear to be > > aperture preferred. Ah, but the ISO is under the control of the camera's > > computer. It is now a third variable: it can be changed at any time. So, > Leica in > > its wisdom invented Auto ISO. Now we have two degrees of freedom. That > > is, we can pick the values of any two: say ISO and aperture, and now the > > shutter speed is determined. Thus, on the Leica, we now have a way of > doing > > shutter speed preferred: set the shutter to the speed you want, set the > > aperture to the f-number you want, and the camera will pick an ISO that > > gives the correct exposure. So, what happens if you set Auto ISO and > > aperture preferred on the M9? You will be in s situation similar to > program > > mode in a point and shoot. The camera will chose both the shutter speed > and > > the ISO value. I took a few shots at three consecutive stops on the > dial, and > > the shutter speed sat at > > 1 > > > /150, perhaps not what I would want with a 90mm. > > > > > > If you set a shutter speed and an f stop with Auto ISO, everything > works > > fine as long as the ISO that gives "correct" exposure is in the > available ISO > > range. And you can use exposure compensation. What you lose is any > > information about exposure in the viewfinder. What information could that > > be? The ISO the camera selects, of course. > > > > > > One warning: the little dot and triangles used for manual exposure > setting > > seem to be meaningless with Auto ISO: just ignore them. > > > > > > Herbert Kanner > > > kanner at acm.org > > > 650-326-8204 > > > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information > -- // richard <http://www.richardmanphoto.com> // http://facebook.com/richardmanphoto