Archived posting to the Leica Users Group, 1999/06/27

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Re: Loading the film
From: Ken Wilcox <wilcox@tir.com>
Date: Sun, 27 Jun 1999 09:02:14 -0400

The more you "mess" with the film the greater the chance of a mis-load.
Drop the film in and replace the baseplate. Works every time. Watch the
rewind crank if you are of faint heart.

Ken Wilcox

At 12:59 PM 6/27/99 +0000, you wrote:
>If you pull the film leader out as far as the diagram inside the camera
>shows, and then drop the film down that last centimeter, you will often see
>that the film leader does not go as far into the take up spool as you
>thought it would go. It seems the film retracts just a few millimeters as
>it travels the final bit down into the camera, particularily if you do not
>hold the cassette --absolutely straight-- when you judge how much of the
>lead is going to protrude. Or perhaps it is that the way round the corner
>is longer when the pressure plate is in position.  A remedy may be to pull
>out the film leader an extra couple of millimetes when in half-down
>position making sure the end (almost) touches the prong that is furthest
>away. Every millimeter counts! And alway check the rewind button when you
>do the first few transport strokes.
>
>Hälsningar till gamla Sverige
>
> >As a new M6-owner I´m not used to the Leica-filmloading. According to the
>>instruction manual you just place the film leader into the take-up chamber
>>spool (in the middle of the three post assembly). This is also shown in the
>>diagram of the camera housing.
>>
>>But I don´t think it is that easy. The take-up chamber spool doesn´t pick up
>>the film leader like it should. I have to try several times before it works.
>>
>>Maybe I have to place the film leader through the three post assembly, but
>>the
>>diagram of the camera housing doesn´t show that.
>>
>>I need help from you "old" Leica-user with this maybe trivial question.
>>
>>
>>Jonas Andersson
>>Sweden
>>
>>
>>PS. Do anyone have any experience with the new flash SF20 and M6 TTL.
>>Maybe I´m
>>buying one and I need some advice.
>
>
>--
>christer almqvist
>eichenstrasse 57, d-20255 hamburg, fon +49-40-407111 fax +49-40-4908440
>14 rue de la hauteur, f-50590 regnéville-sur-mer, fon+fax +33-233 45 35 58
>
>
>
>
- ------------------
Ken Wilcox					Carolyn's Personal Touch Portraits
LAW LHSA MEA						          <wilcox@tir.com>