Archived posting to the Leica Users Group, 2000/06/05

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] Leicaflex SL Info
From: Nathan Wajsman <wajsman@webshuttle.ch>
Date: Mon, 05 Jun 2000 21:22:49 +0200
References: <20000605.122726.-532589.1.EJDong@juno.com>

Evan,

Good for you! I have an SL to supplement my R8, and in many ways this is the most
enjoyable camera I have. And I paid all of $400 for it, including a 50mm
Summicron. I am using the SL as backup to the R8, and also to teach my 10-year
son photography. It is perfect for the latter purpose, with its simplicity and
ruggedness.

When you get it, make sure to shoot a roll of slow slide film (Velvia, Provia
100) under controlled conditions--meaning tripod etc. My procedure for testing
newly acquired stuff is to set up the camera on tripod and photograph a statue.
That way you have eliminated two sources of problems, camera shake and subject
movement. Run through all the speeds and apertures  and take good notes. Then
study the slides on a light table with a good loupe.

Nathan

Evan J Dong wrote:

> After reading all the fantastic rave on the Leicaflex SL and also my own
> experience of using one, I decide to embark on the search for an SL.
> I located one and plan to take the plunge and buy into a Leicaflex SL
> system.  I am looking at a chrome SL body with 3 lenses.
>
> The lenses are :        1. 35mm F2.8    serial no# 220XXXX   Series 6 filters
>                 2. 50mmF2.0     serial no# 224XXXX   Series 6 filters
>                 3.90mmF2.8      serial no# 217XXXX   Series 7 filters
>
> There are no front lens cap nor filters for any of the lenses. Just 2
> rear lens cap and al three lenses have the detachable lens hood.
>
> I will have a 14 day inspection period to check the camera and the lenses
> out.  What should I be looking for in regards to possible problems and
> whom should I have inspect  and do any repairs if necessary, on the
> camera?
>
> I was told that there is a slight tinge of dirt in the viewfinder. I
> would assume that the glass prism would require either re silvering or re
> cementing of the glass.
> What would the equivalent step-up filter size for the Series 6 and Series
> 7 filters?
>
> I would like to take the time to personally thank everyone here on the
> LUG, for sharing their vast knowledge of the Leica system.
>
> Evan Dong

- --
Nathan Wajsman
Overijse, Belgium and Zurich, Switzerland
e-mail: wajsman@webshuttle.ch
General photo page: http://members.tripod.com/belgiangator
Belgium photo page: http://members.xoom.com/wajsman

In reply to: Message from Evan J Dong <ejdong@juno.com> ([Leica] Leicaflex SL Info)