Archived posting to the Leica Users Group, 2002/02/25

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] Rewind crank for M6.
From: "SonC (Sonny Carter)" <sonc@sonc.com>
Date: Mon, 25 Feb 2002 09:17:36 -0600
References: <JGEDKNIANFFFPEBNENAHGEBKDEAA.ksherman@cottenmusic.com>

It is not worth sending your camera out, it is an easy job to replace
the rewind knob.   Just order the part.
Tools needed are jeweler's screwdrivers, (cross-point and regular,)
and a tongue depressor.

If you examine the rewind knob, there are two screws, one straight
down the middle, and another tiny one on the side of the shaft under
the lever.  Remove these, (save them)  and stick the tongue depressor
into the film shaft inside the camera to hold it.  Then simply unwind
the knob from the shaft.  I believe it unwinds clock-wise, but I may
be wrong on this.  Just don't force anything.

Check to make sure the shaft is not bent, and if it is OK, then just
wind the knob onto the shaft, and reset the original screws.   Again,
make sure you are using good quality screwdrivers that fit, and don't
force anything!

Regards,

Sonny
http://www.sonc.com




- ----- Original Message -----
From: "ksherman" <ksherman@cottenmusic.com>
To: <leica-users@mejac.palo-alto.ca.us>
Sent: Monday, February 25, 2002 8:54 AM
Subject: RE: [Leica] Rewind crank for M6.


> Henry,
> This same thing happened to me.
> I sent mine off to DAG.  He said the part was $75, but that the
labor was
> almost nil.
> I don't know yet what my total bill will be.
> Good luck. kim
>
> -----Original Message-----
> From: owner-leica-users@mejac.palo-alto.ca.us
> [mailto:owner-leica-users@mejac.palo-alto.ca.us]On Behalf Of Henry
Ting
> Sent: Monday, February 25, 2002 1:28 AM
> To: Leica-users
> Subject: [Leica] Rewind crank for M6.
>
>
> I have no idea how it could happened. The M6 was in a
> padded bag and I dropped it. Other than a bend rewind
> crank, the camera does not seem to sustain any other
> damage.
> Does anyone have a black rewind crank as spare ?
> I'll pay for it. If not, then any idea how much its
> going to cost me from Leica ?
>
> Thanks
> Henry
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> http://sports.yahoo.com
> --
> To unsubscribe, see
http://mejac.palo-alto.ca.us/leica-users/unsub.html
>
> --
> To unsubscribe, see
http://mejac.palo-alto.ca.us/leica-users/unsub.html

- --
To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html

In reply to: Message from "ksherman" <ksherman@cottenmusic.com> (RE: [Leica] Rewind crank for M6.)