Archived posting to the Leica Users Group, 2002/04/15
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]First advise joe, never ever buy from aaacamera. u got lucky this time. if you think u have problem loading the m6, use a roll as practice roll and go at it. i always make sure the film is on the spokes and it works all the time - ----------------------------------------------------------------------- Regards, Mehrdad - -----Original Message----- From: owner-leica-users@mejac.palo-alto.ca.us [mailto:owner-leica-users@mejac.palo-alto.ca.us]On Behalf Of Joe Stephens Sent: Monday, April 15, 2002 8:36 AM To: leica-users@mejac.palo-alto.ca.us Subject: [Leica] Trouble with loading M-6 (and Voigtlander Ultron 28 MM) I was doing a photo shooting, and after taking a sequence of photos, I noticed to my horror that the film had not loaded properly. I tried to redo, but of course, did not feel like the "redone" photos were as good as the ones I lost. I've had the camera 2 months, and have had this problem in 1 other shoot. The question: Is loading these cameras always hard, and do you just have to be careful, or is there a "trick" I am missing. I never had this prob. with my Nikon F. Do you just have to stop shooting for 3 minutes and audit the advancement of the film by watching the rewind crank????? Second topic. After getting over the sticker shock for my new M-6 TTL, 1.4 Lux 50 mm, Neverready case, and flash, I was looking to save some $$ on a wide angle - after a lot of agonizing and advice from this list, I got the 1.9 28 MM Voigtlander from aaacamera.com and it appears to have performed very well, with a delivered cost of about $450. - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html