Archived posting to the Leica Users Group, 2002/06/25

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] Stainless Stell Dev Tanks
From: S Dimitrov <sld@earthlink.net>
Date: Tue, 25 Jun 2002 07:38:44 -0700
References: <002d01c21b90$95188d50$0100a8c0@DELLXP> <002a01c21b96$0b604ca0$37298d92@phys.wits.ac.za> <3D17456A.F2EEB801@earthlink.net> <3D1753DF.D3968C10@markrabiner.com> <3D17FA41.EA50683F@earthlink.net> <3D1801F6.33A22D0B@markrabiner.com>

Yeah, it's Scotch #2060, lacquer masking tape. It leaks the least. The
blue tape comes undone relatively quickly, and the beige tape leaves a
residue. A residue, as minute as it is, that by my accounting of
Murphy's Law would probably find its way to my film.
Slobodan Dimitrov

Mark Rabiner wrote:
> 
> S Dimitrov wrote:
> >
> > By the way, I use green painter's tape to seal the lid. It leaves no
> > residue to speak of, and it barely leaks (if at all).
> > Slobodan Dimitrov
> 
> Green painter's tape? Is that green masking tape?
> 
> I use masking tape which is kind of beige. The really cheap stuff. For
> some reason it works. Even with developing times well over 10 minutes.
> The lid stays on on on.
> I roll my tank for agataion so the lid kind of has to stay on. Always has.
> 
> Mark Rabiner
> Portland, Oregon USA
> http://www.markrabiner.com
> --
> To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html
- --
To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html

Replies: Reply from "Gene" <sop@erols.com> ([Leica] Leica Lettering)
In reply to: Message from "Brian McCarthy" <straightline@btinternet.com> ([Leica] Stainless Stell Dev Tanks)
Message from "Michael Abbott" <lists@mabot.com> (Re: [Leica] Stainless Stell Dev Tanks)
Message from S Dimitrov <sld@earthlink.net> (Re: [Leica] Stainless Stell Dev Tanks)
Message from Mark Rabiner <mark@markrabiner.com> (Re: [Leica] Stainless Stell Dev Tanks)
Message from S Dimitrov <sld@earthlink.net> (Re: [Leica] Stainless Stell Dev Tanks)
Message from Mark Rabiner <mark@markrabiner.com> (Re: [Leica] Stainless Stell Dev Tanks)