Archived posting to the Leica Users Group, 2005/01/01
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]I think you are saying the same thing I did but, just to be sure: The M6TTL with a SF20 or SF24 or any other enabled TTL flash (a few Metz units and the Quantum) will indicate correct exposure even if the flash has actually overexposed the neg. If you are quickly balancing your light sources in a low light situation, it is easy to select too large an aperture for the flash to handle. It is no big deal as long as you keep this in mind. John Collier On Jan 1, 2005, at 7:16 PM, Rick Dykstra wrote: > John is correct in advising that the TTL sensor only indicates that > either sufficient light or insufficient light has been detected (shown > on the flash and in the viewfinder), but it wont show whether too much > light was received. This could be an issue if using flash systems > that aren't very responsive to the camera's TTL commands. My SF20 and > Metz 50 MZ-5 have been very well behaved.