Archived posting to the Leica Users Group, 2005/03/10

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Urgent advice please - mat cutters
From: simon.ogilvie at gmail.com (Simon Ogilvie)
Date: Thu Mar 10 14:16:12 2005
References: <097badff542ee1ed839ee5348103c432@dodo.com.au> <BA1F1B1FA842DE1E2A247E46@hindolveston.reid.org> <cd604426ca0867f5b4b283676d82b670@paulhardycarter.com> <B5AC086B446B4D04EDB3F8B7@hindolveston.reid.org> <a6e54f9b6559364cbeb2564e963f33a4@paulhardycarter.com> <6e74b37005031014157907267f@mail.gmail.com>

... there's a good pic of the Maped system here:
http://www.modalv.com/alvinpic/Allpics/CS3024.jpg

Simon.


On Thu, 10 Mar 2005 22:15:01 +0000, Simon Ogilvie
<simon.ogilvie@gmail.com> wrote:
> I used to use a Logan, and a friend of mine swears by the Dexter that
> Brian recommended.  I ended up swearing at it more than by it, so I
> changed to a Maped cutter and have never had any problems since.
> 
> The Maped system I use has the cutting head mounted in a slot in the
> ruler so you're always guaranteed that the blade is running straight.
> Keeping it straight, especially in the corners was the problem I had
> with the Logan/Dexter type systems, so this is done for you with the
> Maped system.  Mine comes with two heads - one for 45 degree cuts and
> one for 90 degrees (vertical).
> 
> As Brian says, a fresh blade is also preferable if you can afford it...
> 
> Simon.
> 
> On Thu, 10 Mar 2005 17:21:30 +0100, Paul <paul@paulhardycarter.com> wrote:
> > I don't really understand - you find dry mounted prints curl? Do you
> > mean the glue doesn't take properly and the print curls off the
> > mounting board, or is it that the mounting board itself curls?
> >
> > I still have prints that I dry mounted as a student - twenty(!) years
> > ago - and they haven't curled at all.
> >
> > Since I spent too many hours in a studio as a youngster spray-mounting
> > prints, I find the sight and smell of the stuff makes me queasy!
> >
> > P.
> >
> > *******
> > Paul Hardy Carter
> > www.paulhardycarter.com
> > *******
> >
> > On 10 Mar 2005, at 16:31, Brian Reid wrote:
> >
> > > I have never made any kind of print but a fiber print, save perhaps
> > > for fooling around with RC paper 20 years ago. I find that spray glue
> > > and cold pressing work every bit as well as hot pressing, and are less
> > > likely to curl. It really does work.
> >
> > _______________________________________________
> > Leica Users Group.
> > See http://leica-users.org/mailman/listinfo/lug for more information
> >
>

In reply to: Message from rdcb37 at dodo.com.au (Rick Dykstra) ([Leica] Urgent advice please - mat cutters)
Message from reid at mejac.palo-alto.ca.us (Brian Reid) ([Leica] Urgent advice please - mat cutters)
Message from paul at paulhardycarter.com (Paul) ([Leica] Urgent advice please - mat cutters)
Message from reid at mejac.palo-alto.ca.us (Brian Reid) ([Leica] Urgent advice please - mat cutters)
Message from paul at paulhardycarter.com (Paul) ([Leica] Urgent advice please - mat cutters)
Message from simon.ogilvie at gmail.com (Simon Ogilvie) ([Leica] Urgent advice please - mat cutters)