Archived posting to the Leica Users Group, 2005/11/11

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Template ?
From: cochranpr at mac.com (David Cochran)
Date: Fri Nov 11 12:37:11 2005
References: <606732A3F6993F4FB3A69EA6D09B45810D1247@ssdrocxch1.SSD.de.ittind.com>

Hello Robert. I want to welcome you to this great group of people.
I hope to see many posts from you.

peace

David
On Nov 11, 2005, at 3:44 PM, GUTKNECHT, ROBERT F - SSD wrote:

>
>      I am a new member - this is my first post. I was just given what I
> think is a film trimming template for shaping the ends of 35 mm. film
> rolls. It is a flat, two piece, hinged device with a brushed steel
> finish. When the two pieces are closed on one another, two sprocket
> studs on one surface protrude through two corresponding holes in the
> other surface. When opened, it has engraving near the top which says
> "coated side". Below this text there is a slot milled through the metal
> on a 45 degree angle. It has a lanyard hole near the tapered tip. The
> top of the front surface is engraved "Leitz...Wetzlar...Germany". Can
> anyone explain exactly how it is used and where I can get an original 
> or
> reprinted instruction sheet for it ? Thanks very much in advance.
>
>
> ************************************
> This e-mail and any files transmitted with it are proprietary and 
> intended solely for the use of the individual or entity to whom they 
> are addressed. If you have received this e-mail in error please notify 
> the sender. Please note that any views or opinions presented in this 
> e-mail are solely those of the author and do not necessarily represent 
> those of ITT Industries, Inc. The recipient should check this e-mail 
> and any attachments for the presence of viruses. ITT Industries 
> accepts no liability for any damage caused by any virus transmitted by 
> this e-mail.
> ************************************
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information


In reply to: Message from ROBERT.GUTKNECHT at itt.com (GUTKNECHT, ROBERT F - SSD) ([Leica] Template ?)