Archived posting to the Leica Users Group, 2006/02/08

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] leicameter. how to use?
From: firkin at ncable.net.au (Alastair Firkin)
Date: Wed Feb 8 13:23:38 2006
References: <200602081517.k18FHW2m036605@server1.waverley.reid.org>

There are probably better ways, but "in general", I set it to the high 
range out doors, and low range indoors, take a reading and if the 
needle is at the extreme of the metering range, switch it across. 
Sometimes takes two readings, but they are usually identical when they 
"cross-over".

Remember that the reading angle is about equivalent to a 90mm lens, so 
you can preview the "spot" using the 90mm frame.

The "great" thing about the "outboard" meter is the speed. Without 
appearing to be preparing for a photo, you make a reading, set your 
exposure, now watch the "victim" fixing the focus with the lens tab and 
faster than ANY autofocus/auto exposure camera in the world, you raise 
frame and expose. Makes one feel almost HCB in stealth ;-)

On 09/02/2006, at 2:17, bernardo lopes feio wrote:

> Hi
>
> I already have the substitute for my m7 that is being repaired...
>
> The m4-p had arrived yesterday and the leicameter MR today.
>
> I have some questions about how to use the leicameter. It has 2 
> positions,
> white dot and red dot.
>
> When should I use them? I know that the red dot is for low light 
> situations
> but when does that starts?
>
> When I'm measuring the light in a room, for example, the diagram 
> readings,
> for the same speed, with the white dot and red dot should be the same 
> right?
>
>
> In the dial there are 2 scales one white the other red. I should start 
> using
> the red dot when the measuring are in the red scale?
>
> Thanks and b regards from portugal

Alastair


In reply to: Message from bernardofeio at yahoo.com.br (bernardo lopes feio) ([Leica] leicameter. how to use?)