Archived posting to the Leica Users Group, 2009/01/15

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] OT: Audiophile Question
From: len-001 at verizon.net (Leonard Taupier)
Date: Thu Jan 15 11:35:23 2009
References: <COL119-W39405754CB1E7C351F1C4282D70@phx.gbl> <47EE8D0F-6719-40C1-A0A6-936F656C9079@verizon.net> <011520091923.15794.496F8D3C000A7AE600003DB2223045151403010CD2079C080C03BF970A9D9F9A0B9D09@mchsi.com>

Gene,

The problem is not with high quality RCA connectors. It is with cheap  
connectors that are made from metal that is too soft so it loosens up  
with just a little movement. I'm sure the government didn't buy their  
parts from Radio Shack. By far the greatest use of XLR is for  
professional microphones.

Len


On Jan 15, 2009, at 2:23 PM, grduprey@mchsi.com wrote:

>
>
> A bit of info on RCA connectors:  A properly put together RCA  
> connector will not go intermittent.  As simple as they are, it is  
> hard to not put one together correctly.  The US Navy required them  
> during WWII, and Collins Radio used them all the time for their Ham  
> Gear, (Which by the way was also used by the US Government, and  
> others).  My current installation has been up and running for 8  
> years and no intermittents, and previously setup for 13 years with  
> no connection problems with RCA connectors.  By the way, all of my  
> microphones, except one, use XLR connectors, which are also quite  
> good.
>
>
> Cheers,
> Gene
>
>  -------------- Original message from Leonard Taupier  
> <len-001@verizon.net>: --------------
>
>
>> Hi Greg,
>>
>> When using the XLR inputs and outputs you are using a balanced system
>> which should improve the signal to noise and increase the signal
>> level by 3 db. Also RCA jacks are much more likely to become
>> intermittent. XLR connections are superior and are generally found on
>> more expensive equipment where audio quality is the prime
>> consideration. Of course the cables themselves can be very expensive
>> and can include filter networks to further improve audio quality. Do
>> some research on the subject.
>>
>> Regards,
>> Len
>>
>>
>>
>>
>> On Jan 14, 2009, at 10:44 PM, Greg Lorenzo wrote:
>>
>>>
>>> I've got a new amplifier to hook-up to a new pre-processor. I can
>>> connect the two together with either RCA or XLR cables.
>>>
>>> Is there a noticeable benefit to hooking these up with XLR cables
>>> rather then RCA jacks?
>>>
>>> The distance between both units is approximately 4 feet.
>>>
>>> Greg Lorenzo
>>> Calgary, Canada
>>> _________________________________________________________________
>>> Windows Live?: Keep your life in sync.
>>> http://windowslive.com/explore?
>>> ocid=TXT_TAGLM_WL_t1_allup_explore_012009
>>> _______________________________________________
>>> Leica Users Group.
>>> See http://leica-users.org/mailman/listinfo/lug for more information
>>
>>
>>
>> _______________________________________________
>> Leica Users Group.
>> See http://leica-users.org/mailman/listinfo/lug for more information
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information



Replies: Reply from grduprey at mchsi.com (grduprey@mchsi.com) ([Leica] OT: Audiophile Question)
In reply to: Message from gregj_lorenzo at hotmail.com (Greg Lorenzo) ([Leica] OT: Audiophile Question)
Message from len-001 at verizon.net (Leonard Taupier) ([Leica] OT: Audiophile Question)
Message from grduprey at mchsi.com (grduprey@mchsi.com) ([Leica] OT: Audiophile Question)