Archived posting to the Leica Users Group, 2009/08/21

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] BOATING PAD - Spritsail Dinghy
From: sonc.hegr at gmail.com (Sonny Carter)
Date: Fri, 21 Aug 2009 20:27:19 -0500
References: <CADAB634-4F2E-4387-AD65-CAF16A4AC8E6@comcast.net> <a3f189160908211207x2b1e1fdbw369e00e19ba8095@mail.gmail.com> <74A38665-C51F-454F-9947-0928E8C8CE7E@comcast.net>

Of course, if someone was following this as directions, I should clarify,
that you pull up on the snotter after you put the sprit end in, and  then
cleat it down.  ;-)

On Fri, Aug 21, 2009 at 6:52 PM, Richard Taylor <r.s.taylor at 
comcast.net>wrote:

> Sonny - You infinite knowledge of all the important things in life amazes
> me.  I'd forgotten your boat was sprit rigged.
>
> Regards,
>
> Dick
>
>
>
>
> On Aug 21, 2009, at 3:07 PM, Sonny Carter wrote:
>
>  My P'dincle is sprit rigged, and the mast on the 17 foot boat is but 8
>> feet
>> tall.
>>
>> So, we usually row out past  harbor traffic, step the mast, raise the
>> main,
>> stick one end of the sprit into the peak, and the other into the snotter,
>> raise the jib, and trim by the main sheet, jib sheet, then tighten down
>> the
>> snooter to get a clean line on the main.
>>
>> If a blow comes up, all you have to do is loosen the snotter, pull out the
>> sprit, and you've effectively shortened sail by half!  As others have
>> pointed out, no boom headachers.
>>
>>
>>
>> On Fri, Aug 21, 2009 at 10:17 AM, Richard Taylor <r.s.taylor at 
>> comcast.net
>> >wrote:
>>
>>  ... with senorita.   That's pronounced spritz-zel, BTW.  This simple rig
>>> goes way, way back to Roman times, was a common feature on Thames barges,
>>> and was commonly used for small dinghies on Cape Cod in the early-part of
>>> the 20th Century.  It's an easy boat to rig or stow since at the end of
>>> the
>>> day the sail is "brailed" (rolled) up against the sprit and mast,
>>> everything
>>> tied together and the mast unstepped and dropped into the boat.
>>>
>>> This one looks like a recent replica of an much older sailing dory
>>> design.
>>>  Check out the low, curving tiller.  If that doesn't rise, (it looks like
>>> it does but I've run across a few boats where it doesn't) this boat would
>>> be
>>> hellish to hold down in any kind of a blow.  In the 5-10 knot breeze we
>>> had
>>> this day the boat balanced perfectly with the senorita, er, crew sitting
>>> in
>>> the boat.
>>>
>>>
>>> http://gallery.leica-users.org/v/rtaylor/PICKS/2009_boating_pad/?g2_page=5
>>> or
>>> http://tinyurl.com/nbswky
>>>
>>> D300, etc.
>>>
>>> C&C always welcome.
>>>
>>> Regards,
>>>
>>> Dick
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Leica Users Group.
>>> See http://leica-users.org/mailman/listinfo/lug for more information
>>>
>>>
>>
>>
>> --
>> Regards,
>>
>> Sonny
>> http://www.sonc.com
>> http://sonc.stumbleupon.com/
>> Natchitoches, Louisiana
>> (+31.754164,-093.099080)
>>
>>
>> If you are wondering, the following abolishes Gmail ads.  ;-)
>>
>> I enjoy the massacre of ads. This sentence will slaughter ads without a
>> messy bloodbath.
>> USA
>>
>> _______________________________________________
>> Leica Users Group.
>> See http://leica-users.org/mailman/listinfo/lug for more information
>>
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>



-- 
Regards,

Sonny
http://www.sonc.com
http://sonc.stumbleupon.com/
Natchitoches, Louisiana
(+31.754164,-093.099080)

USA


In reply to: Message from r.s.taylor at comcast.net (Richard Taylor) ([Leica] BOATING PAD - Spritsail Dinghy)
Message from sonc.hegr at gmail.com (Sonny Carter) ([Leica] BOATING PAD - Spritsail Dinghy)
Message from r.s.taylor at comcast.net (Richard Taylor) ([Leica] BOATING PAD - Spritsail Dinghy)