Archived posting to the Leica Users Group, 2011/07/27

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Magic, I say!
From: benedenia at gmail.com (Marty Deveney)
Date: Thu, 28 Jul 2011 16:21:52 +0930
References: <CAF8hL-H8wpBkjXzzmdh1huR4Ro04QTKCOzBJAK-djD7OByOqxg@mail.gmail.com> <CA56170B.4D761%chris@chriscrawfordphoto.com> <CABmfTOUXg7JxFM8HBqtyOp4i3eBrAsswS5SfnfQYXG3DFsN2uw@mail.gmail.com> <CAF8hL-GoAn7A1BdrWv3_fvUMMzKrExqGpJ+02Sh1bDKu2ESy8A@mail.gmail.com>

You're welcome; that version is better, but the compression is still
visible - if it's in the original you can't manipulate your way around
it very effectively or easily.

Marty

On Thu, Jul 28, 2011 at 4:15 PM, Richard Man <richard at imagecraft.com> 
wrote:
> Thanks Marty, I will play with the 2-bath Pyrocat-HD more to get the 
> maximum
> out of it. I tweaked the image a little bit to giv it a little bit more
> mid-punch. Not sure if it helps or not.
>
> Thanks again for the advice.
>
> On Wed, Jul 27, 2011 at 10:08 PM, Marty Deveney <benedenia at gmail.com> 
> wrote:
>
>> I really like this process too - pyrocat developers are really sharp.
>> The shot of your wife on the bike shows some of the midtone
>> compression that is a problem with all two-bath developers (the only
>> real way I found to solve it is with more exposure and more
>> development) but particularly ones like pyrocat where the A-bath
>> really doesn't hve enough alkali in it to initiate development. ?With
>> almost all other formulae - divided D76, Diafine, whatever, the A bath
>> has enough sulfite or other alkali in it to raise the pH enough for
>> some development to begin. ?Shoot a few frames, run them through the
>> A-bath of a two-part developer and then fix if you would like
>> evidence.
>>
>> You can clean your reels very effectively in a dishwasher - the
>> alkaline detergents used in those machines, combined with the heat,
>> effectively remove any residues on the reels - and when you pull them
>> out they are dry (so if they are plastic they are ready to load up
>> again right away).
>>
>> Marty
>>
>> --
> // richard <http://www.imagecraft.com/>
> // icc blog: <http://imagecraft.com/blog/>
> // richard's personal photo blog: <http://www.5pmlight.com>
> [ For technical support on ImageCraft products, please include all previous
> replies in your msgs. ]
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>


Replies: Reply from disfromage at ameritech.net (Richard Wasserman) ([Leica] Magic, I say!)
In reply to: Message from richard at imagecraft.com (Richard Man) ([Leica] Magic, I say!)
Message from chris at chriscrawfordphoto.com (Chris Crawford) ([Leica] Magic, I say!)
Message from benedenia at gmail.com (Marty Deveney) ([Leica] Magic, I say!)
Message from richard at imagecraft.com (Richard Man) ([Leica] Magic, I say!)