Archived posting to the Leica Users Group, 2012/10/18
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Whoa, WTF, looks like it's slightly rusted! I guess need to get some 1000 grit sandpaper... argghhh On Thu, Oct 18, 2012 at 8:17 PM, Richard Man <richard at richardmanphoto.com>wrote: > They are on the negatives so not the scanner... > > FOUND it. One of the rollers of the film folder somehow has gunk on it! > > Thanks > > > On Thu, Oct 18, 2012 at 8:09 PM, Leo Wesson <leowesson at gmail.com> wrote: > >> Could be the scanner... >> >> Leo Wesson >> www.leowesson.com >> >> On Oct 18, 2012, at 21:59, Mark Rabiner <mark at rabinergroup.com> wrote: >> >> > Its not a pressure plate issue as that would be scratching the base >> side and >> > you'd have a white line not black line. Its between the film and the >> front >> > of the camera. >> > >> > Mark William Rabiner >> > Photography >> > http://gallery.leica-users.org/v/lugalrabs/ >> > >> > >> >> From: Richard Man <richard at richardmanphoto.com> >> >> Reply-To: Leica Users Group <lug at leica-users.org> >> >> Date: Thu, 18 Oct 2012 19:50:35 -0700 >> >> To: Leica Users Group <lug at leica-users.org> >> >> Cc: Mark William Rabiner <mark at rabinergroup.com>, Frank Filippone >> >> <red735i at earthlink.net> >> >> Subject: [Leica] MUCH Better! 617 Tests >> >> >> >> Alright, these look much better: >> >> >> >> 150mm Fuji @F32 >> >> http://richardmanphoto.com/PICS/20121019-Scanned-12.jpg >> >> >> >> 90mm Fuji @F32 >> >> http://richardmanphoto.com/PICS/20121019-Scanned-13.jpg >> >> >> >> Thank you all for indulging my long winded posting and helping me to >> get >> >> this right, especially to Frank and Mark. >> >> >> >> I'm not entirely how I eff'ed up yesterday but at least I know if I >> dot all >> >> the I's and cross all the T's, I can do this. >> >> >> >> I will make some sample print, just to see. >> >> >> >> Now there is just one problem, ALL negatives so far have a horizontal >> line >> >> across, just slightly below the bottom third, I believe. You can see >> this >> >> in the enlarged section: >> >> http://richardmanphoto.com/PICS/20121019-Scanned-13-1.jpg >> >> >> >> I saw that yesterday already and I triple-cleaned the film holder and >> the >> >> darkslide and I don't know where it may come from. >> >> >> >> p.s. I checked the film flatness in the holder, and it really should >> not be >> >> an issue as the pressure plate should hold the film fairly tight >> against >> >> the film rails. >> >> >> >> Thanks again!! >> >> >> >> -- >> >> // richard <http://www.richardmanphoto.com> >> >> >> >> _______________________________________________ >> >> Leica Users Group. >> >> See http://leica-users.org/mailman/listinfo/lug for more information >> > >> > >> > >> > _______________________________________________ >> > Leica Users Group. >> > See http://leica-users.org/mailman/listinfo/lug for more information >> >> _______________________________________________ >> Leica Users Group. >> See http://leica-users.org/mailman/listinfo/lug for more information >> > > > > -- > // richard <http://www.richardmanphoto.com> > > > -- // richard <http://www.richardmanphoto.com>