Archived posting to the Leica Users Group, 2006/11/15
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Alastair If you have the holder for earlier models it does seem to work fine in the Coolscan V. I just couldn't imagine having to cut negative in singles and use slide mounts. Walt Alastair Firkin wrote: > Thanks Walt: I thought I had all the attachments, but I don't think > I've got a flat multi holder for this one: my old coolscanner did. > I'll check again > On 16/11/2006, at 0:42, Walt Johnson wrote: > >> The Coolscan negative holder seems to do the trick as well. Uncut >> strips of six slide in flat and aligned >> >> Walt. >> >> >> Tina Manley wrote: >> >>> At 01:25 AM 11/15/2006, you wrote: >>> >>>> Thanks, I had a fairly long end on the film, I did trim it and the >>>> problem became worse: perhaps I did not square off the edges, but >>>> really this is silly, I should be able to "direct" the scanner to >>>> start scanning where I want to. I try skype later, but I notice you >>>> are off line at the moment >>>> >>>> cheers >>> >>> >>> >>> Alastair - I solve all of those alignment problems by mounting my >>> B&W negatives in slide mounts. The Gepe and Wess mounts hold the >>> film flat and with the bulk loader for the LS5000 you can scan 40 >>> slides at a time. Since the negatives are mounted individually in >>> slide mounts, you can also file them in slide pages by subject and >>> edit out all of the ones that belong in the round file. >>> >>> Tina >>> >>> Tina Manley, ASMP, NPPA >>> http://www.tinamanley.com >>> >>> _______________________________________________ >>> Leica Users Group. >>> See http://leica-users.org/mailman/listinfo/lug for more information >>> >> >> _______________________________________________ >> Leica Users Group. >> See http://leica-users.org/mailman/listinfo/lug for more information > > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information >