Archived posting to the Leica Users Group, 2007/01/19

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Leica 111c instructions
From: len-1 at comcast.net (Leonard Taupier)
Date: Fri Jan 19 15:29:37 2007
References: <000301c73bce$eae13d00$6501a8c0@asus930> <96AF4544-0552-4ACC-96A2-E00500A63DF6@ncable.net.au>

I found that since I started cutting the leader I don't have to check  
through the open shutter any more. I hope it's more then just luck.

Len


On Jan 19, 2007, at 6:18 PM, Alastair Firkin wrote:

> Welcome to an intriguing club: There are a number of tricks with  
> the LTM cameras. One is to load the film with the shutter open and  
> the lens removed so you can guide the film with your finger from  
> the outside!!! I don't think I have a IIIc manual, but I do have  
> some if nothing appears in the IIIf and g line
>
> Cheers
> On 20/01/2007, at 0:37, G Hopkinson wrote:
>
>> Dear LUG folk, this evening in an idle browse past a local camera  
>> shop I found a Leica 111 body for sale amongst the plethora of
>> Nikon F100s etc being given away for a fraction of their former  
>> value.. Their expertise might be gauged by the tag which was marked
>> Leica M body. Anyway I thought that it was reasonably priced and I  
>> felt it was my duty to take it home. It appears to be a 111c from
>> 1949 and is pretty clean externally even the shutter appears to  
>> operate somewhere close to all of the marked speeds. Just guessing I
>> know but no obvious slowing down on the slow speeds, nor any  
>> visible shutter curtain damage. The body is dent free. I mean the
>> chrome is intact and the sharkskin? Vulkanit completely intact.  
>> Baseplate scratches and burnishing on the forward edge of the top
>> plate. The finder and rangefinder will hopefully benefit from a  
>> clean. RF seems functional with decent contrast even in low light
>> tonight. Not greatly clear certainly. So anyway, a user, I hope  
>> and a lovely piece of history for me as an M user. Certainly I will
>> need to invest in a CLA. The aim is simply to be a user and I'd  
>> plan to acquire a reasonable lens after getting the body serviced.
>>
>>
>>
>> Can anyone point me towards an instruction manual?  On-line would  
>> be great.
>>
>>
>>
>> I don't have any experience at all with the LTM models. I think  
>> that I have figured out the shutter speed selections. Also what
>> seems to be a diopter adjustment on the rangefinder. It lets me  
>> resolve even very fine text at a metre or two. I have no idea what
>> is normal clarity for the RF or finder. Do I need to be trimming  
>> the film leader? Any other advice would be welcomed. Lens wise, I
>> had in mind getting a period correct Leica 50 (a coated Elmar 50?)  
>> or otherwise a 35 or 28 that I might use with an external finder.
>> Again any suggestions would be most welcome. It's purely for  
>> pleasure and to preserve a wonderful old camera.
>>
>>
>>
>> Cheers
>>
>> Hoppy
>>
>>
>> _______________________________________________
>> Leica Users Group.
>> See http://leica-users.org/mailman/listinfo/lug for more information
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information


In reply to: Message from hoppyman at bigpond.net.au (G Hopkinson) ([Leica] Leica 111c instructions)
Message from firkin at ncable.net.au (Alastair Firkin) ([Leica] Leica 111c instructions)